Let's not get heated up. If we are to help this young man, let's be sincere about it.

Roby go step by step. For the moment, forget about the props - Two of your motors mounted on either side of an arm will spin clockwise (check the diagram I have posted above). Have you achieved that in the correct positions?

  that's the spirit 

Take off your props. Attach little pieces of adhesive tape to your motor shafts, power up the unit and see if the motors are spinning the way they should.

If they aren't, all you have to do is to de solder the wires going from ESC to motor and interchange any two wires. The motor rotation direction will be reversed. Got that? If not PM me your number and I will call you and talk you through it.

Go ahead VC

the props moving is right direction... opposite it same.. so checked
all possible reasons for problem:-1)my frame is a bit crazy... wood pieces mounted on pvc.. looks nice but i doubt frame might be a problem.
2)i'm not using a pdb.. all wires soldered.. can that be a reason for one of the motors to spin slow?
3)board is not screwed..maybe the flight is not stabilized... though i'm pretty sure that my acc calibration went fine

You have a PM

http://www.youtube.com/watch?v=B6m49Cw3OFU&hd=1#aid=P8VsU_mE_zQ

Merged.

This is your final warning against creating multiple threads on a single build.

People have to ask again and again in the new thread about what you equipment you are using, what have you done and tried so far etc.  It is confusing and extremely annoying, and I have got multiple complaints about this. Simply put, creating a new thread on an ongoing issue defies every bit of the minimum common sense that we all should have.

quad is fine....it did lifted itself...but is highly unstable... and it revolves on its own axis very fast....just like earth... bit more fast..

what next sir''''s??

Well prop and motor all together rotation is wrong and props are not balanced and flight control board is not mounted on vibration damping material

fc is mounted properly this time and rotations fine.. opp. cw and adjacent ccw.. all props throwing air down... i have just missed the prop balancing step...can it have this big impact??

What are your views vc sir??

Are your motors alignments strictly vertical? Have you followed the youtube video and programmed the board in all respects?

Reverse the Yaw gyro on it and you should be fine.

Yes sir... Well doesn't matter now... I'll be going for a new frame.. And this time will go step by step with patience.. I had flaws... Lack of knowledge or be it haste

Attaboy, that's the spirit! All the best for the new build.

Quote from: roby on March 11, 2014, 10:25:48 PM
Yes sir... Well doesn't matter now... I'll be going for a new frame.. And this time will go step by step with patience.. I had flaws... Lack of knowledge or be it haste

Roby !!

that is the attitude, you will go a long way !! in this hobby,, very early in life you have been taught patience..Good for you. Keep at it

  thanks for support forum heros 

Have you spoken with the carpenter? Ask him if he can cut you 2 circles of 6" dia from 4mm ply. They will serve as the mounting boards of your electronics = Controller board and Rx (upper level) and Battery (lower level).

Aluminium tubes from here:

http://aeroworks.co.in/store/index.php?id_product=8&controller=product

Roby you're welcome to come over to Noida sometime this weekend if you need help with the quad.

have my exams now... but am planning to stay this summer in delhi so will visit very soon...
still if you plan to come delhi you're most welcome to come over to meet me,, after all we share a common hobby apart from rotors.. guitar

Soon you will get any copter hubs, wooden and aluminum booms, h-quad hub and motor mounts on quadkopters. So your quad building will be more easy

quad wants to dance..Some issues with esc calibration or pi settings i guess..  
if anyone can fix it with a skype call or whatsapp guidance, and will correct me.. i have a very special rc gift for him ,
will ship it for free  

Issue is somewhat like this, but a bit more horrendous as it wants to flip even before it can lift itself properly



You can even have a hands on if you're from Delhi

Ping me at 9555569902

Reverse the yaw limit in Mixer editor for all motors, as in if the Rudder= -70 make it +70
check the motor layout and check if the corresponding motors are spinning in the correct direction
Redo this step for whichever control is going out of control, turning in the wrong direction by itself