Hi Everyone,
I am starting this thread to inform all of you guys about my Quadcopter Build.
I will be shortly posting pics.
Any help is appreciated.I need all of you guy's help to finish my build.

QUADCOPTER CONFIGURATION
Q680 V3 Glass Fiber Quadcopter Frame 680mm - Integrated PCB Version
Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Turnigy MultiStar  2216-800KV 14-Pole Outrunner Motor
Afro 20A ESC
FlySky FS-TH9X-B 9CH Transmitter and 8CH Receiver with 2.4ghz Module
Lightweight FPV Multifunction 200mm High Landing Gear Set for Multi-Rotors (Red/Black)
Turnigy 2200mAh 3S 20C Lipo Pack

You need to go for a bigger battery around 3000mah with 30C would be better or any battery which is capable of supplying a minimum of 60A will do the job. But don't use 2200mah with 20C you may set your quad on fire.

@zalman,where did u get those motors???
Need 4 of those urgently!!!

From Hobbyking warehouse.
It was a combo.
Was US$120 when I purchased.Now it is US$86
http://www.hobbyking.com/hobbyking/store/__76073__MultiStar_Afro_Combo_Pack_2216_800KV_and_Matched_20A_Afro_ESC_Set_of_4_CW_CCW_AR_Warehouse_.html