Hi,
iam planning to build heavy lift hexacopter to lift DSLR Camera.i want to use custom build frame with APM2.5.
please suggest me suitable motors to lift 2kg DSLR camera.
Need suggestions.....

Thank you...........

2814 700kv sunnysky with 4S and 12" with 30A ESC

or if you good for 6S go with 380kv 4108 with 15" props with 30A(2-6S)

Thank you Rahulvyas sir.......

hi Rahulvyas sir

could you please tell me maximum thrust of 700kv motor and 380kv motor

well i have the 2814 700kv motor on my hexacopter.
according to the data it will give 2.1kg thrust with 5S and 11" props
380kv motor has 2.2kg but will take only 15-17A current with 6S and 15.5" props

what frame are you buying?

 Iam planning to build frame with carbon finer tubes....any suggestions any any suggested frame ......

hi all

need more suggetions to choose motors ....

Whats your budget for this complete build?
and why building a CF frame? it will be costlier!
go with a tarot 810 or 960 hexacopter frame, very very rigid!

my budget below 100,000. Tarot 810 and 960 frames little expensive like $350.
so i want to build frame with CF tubes within Rs.6000/-
which frame u have for your hexa...

Dear Mr. Ramarao,

I found  Tarot T960 C/F Folding Hexa-copter suitable for me. I have ordered one and it is in customs currently. I will let you know the comments shortly.If you are planning to lift expensive payloads like 5D Mark-3 I would strongly recommend you to buy a frame rather than building it yourself.

Custom frames might have large vibrations which will creep into your video. If you are only going to take photographs you can think of building a frame else please consider buying one.

Anyway what is your choice for Gimbal?

by the way, for a 5D like camera , a cinestar gimbal or its clone is recommended.
most of the aerial photographers use that. costs ~550$

I had a very bad experience with photohigher. Though I have not used cinista.I agree with rahul. It is definitely better than photohigher. Now I have ordered a cinistar clone from tarrot. I will update once I get it in hand.$550 from where? Does it include electronics and controller?

yes, it includes everything except shipping - http://www.infinity-hobby.com/main/product_info.php?cPath=198_230&products_id=9770&osCsid=fc4b4480400adcef2939e1ef6af40307

how much does photohigher cost?

http://www.photohigher.co.nz/products/camera-gimbals-and-kits/av200/av2-av200-pan-360-w-skids/

Gimbal controllers has to be bought seperately.

This is an coax with custom built frame. Though it can easily carry 5D I am not able to trust it so much.

why not?
its a x8 right?

I want to fly this for a while to understand its dynamics(problems actually ). I am not confident because I made the frame LOL . Apart from this he is a capable guy. Weighs 7kgs without payload. He has also completed wapypoint navigation and landed without any problem. It has an endurance of about 15-18 mins with 1kg payload.

sweet, what else do you need then, go any put a DSLR or maybe a cheaper camera for beginning!

Once the shipment jumps out of customs I will have a gimbal to play with. I will do a good waypoint mission with a gopro first if all is well... I could load it with other expensive equipments.

oky cool. good luck ganesh

thank you Ganesh. good luck

Hi sir... you can use pvc pipes to build the structure...I am not an expert in multirotors but pvc pipes are cheap and best... you can also get the required connector... good mix of strength, light weight and cost efficiency