Hi,
Can some one advice me whether the below configuration is good or not.

Motor:
       DT750 Brushless Outrunner Motor   -   Rs. 1300 EACH - Quadkopters
   (11.1v, Max current 18A, Thrust: 1000g+, Weight: 78g, Kv: 750rpm/v)
    or
   Turnigy Multistar 2216-800Kv 14Pole Multi-Rotor Outrunner   -   ₹1,470.00 each  - VibrantHobbies
   (11.1v, Max current 20A, Thrust: 1000g+, Weight: 66g, kv: 800kv)

Props:
   11*4.7 SF

ESC:
   TURNIGY Plush 30amp Speed Controller  (Rs. 1300 Each) RC Mumbai
   (30A, BEC : 5v / 2A, 2-4s, Weight: 25g)               

FC: Crius AIOP V2.0 Ardupilot, Multiwii Compatible Flight controller (Rs.3,100) - Robokits

RC: Flysky 9x 2.4GHz 9CH Transmitter - Rs. 6000 - RCMumbai

Battery:
   Turnigy nano-tech 3000mah 3S 25~50C Lipo Pack (RS. 3,405.00 ) -  EdallHobby
       or
   Turnigy 4000 mAh 3S 11.1 V 30C Lipo (Rs. 3,599.00)

that is a good configuration actually. but you can also consider sunnysky 2216 motors, which are superior in quality compared to the hobbyking motors.
for the escs, the turnigy plush is too costly and also it is not multirotor specific, you could get branded simonk escs for better price.
you can get batteries for far better price by contacting robu.in or vibranthobies.
you haven.t listed a frame, in that list - are you making one yourselves ?
these are just my suggestions, however the items you selected will work as intended .

Great. Thanks. Sure, I will consider your suggestion.

Hi,
I just changed the motor & esc.

Motor:
   SunnySky 2216-11 900KV (Rs. 1550) Quadkopter
   http://www.quadkopters.com/product/brushless-motors/sunnysky-2216-11-900kv/

Props:
   11×4.7 Propellers Orange   (Rs. 180/Pr)
   http://www.quadkopters.com/product/11-inch/11x4-7-propellers-orange/
ESC:
   Simonk 25A Esc (Rs. 690.00) - RCMumbai
   http://rcmumbai.com/index.php/product/simonk-25a-esc/
   
FC: Crius AIOP V2.0 Ardupilot, Multiwii Compatible Flight controller (Rs.3,100) - Robokits

RC: Flysky 9x 2.4GHz 9CH Transmitter - Rs. 6000 - RCMumbai

Battery:
   Turnigy nano-tech 3000mah 3S 25~50C Lipo Pack (RS. 3,405.00 ) -  EdallHobby
   Turnigy 4000 mAh 3S 11.1 V 30C Lipo (Rs. 3,599.00)

my 2 cents....

go for a reptile type frame....

good luck with ur build...

Is there anything I need to change here ? in the configuration. ? I'm planning to order these things in LHS.

You can get even better deals on battery .
for the flight controller , get a complete APM kit .

Hi,
I guess , I can get battery @ low cost in - robu.in. apart from battery, other components price are reasonable ? as mentioned in earlier post ?

what is that APM kit. ? Can you please write in brief. I can use that CRIUS with RC, there wont be any issues with that. ?

Subhiya PM me

Hi,
I'm planning to use Crius AIOP V2.0 FC and Flysky 9x 2.4GHz RC/R8B, Is that ok. Is there any restrictions b/w these two components.

Can anyone please clarify my doubt

I found MultiWii AIO Pro V2.0 in quadkopter for rs. 4950.00. But in the image section, he wrongly uploaded the image of Crius AIOP V2.0. But the spec. mentioned there is for MultiWii AIO Pro V2.0. Is that correct, just want to check whether I'm looking for correct board or not.

http://www.quadkopters.com/product/flight-controllers/multiwii-aio-pro-v2-0/

Multiwii AIO Pro v2 Hobbyking site:
http://www.hobbyking.com/hobbyking/store/__31138__Multiwii_and_Megapirate_AIO_Flight_Controller_w_FTDI_ATmega_2560_V2_0.html

CRIUS AIOP V2.0
http://robokits.co.in/quadrotors-hexarotors/flight-controllers/crius-all-in-one-pro-aiop-v2.0-full-featured-flight-controller