Any one has mod parrot ar drone 2.0 to work with tx ?

Out if the box it works with wifi via idevices, wanted to make it work with some tx for higher range and better control.

I see online that it can be done via any 6ch tx/rx but also needs some board etc.

Looking forward for help in detail..

Thanks

Hi,

You may want to check this thread:
http://www.rcgroups.com/forums/showthread.php?t=1420951&page=47

Also this website which sells the mod board:
http://mirumod.tk/hw/mirupcb/mirupcb.php

After that it should just be putting a compatible Rx & your TX to get started with a much more predictably controlled drone.

Thanks Dheeraj,

Have referred that earlier too but anyone here has used this mod or some other ?

Thanks

Hi,

Lot of ppl are using that mod, I am not aware of anyone using it on this forum (kindly pitch in, if someone is), however I would suggest you connect with ppl on the thread I had mentioned earlier. The developer of the mod himself is answering ppl on that thread.

Hope it will be helpful

Hi,

Yes I had a chat with that mod over the email, but better option is www.xr-4drone.com these guys are also using miru mod but along with rx  at $80, it's like plug n play, any dsm2 module compatible tx will work.