Hi guys , I have put a camera on my old f450 , to reduce the vibration , I have balanced the prop , put some foam underneath the camera , but still the image is horrible at 720p , because it vibrates so much , any tips ? :bow:
How are you attaching the camera?
Like this :
Try to mount the cam with just Velcro. Don't tie it with rubber band. I used the rubber band and was getting vibs, with the cam just sitting on velcro eliminated vibrations. Try it.
I'll try it , thanks
stick the velcrow by using tape or any liquid ;)
look at my pic i did the same for my f450 frame
May these images can help you. They are generally for flight controller mounting. But I hope you can use them as you camera mount.
You can do it yourself. First buy some vibration damping balls.
I am new in this hobby. Many experienced people are here. They ll help you a lot.
You can try the landing gear
I have anti vibration mount for sale which will help u
Let me know if interested
The foam that you are using seems very hard. Try to use a lesser dense foam. Or you can use some rubbers, like bat grip. You would have some vibrations but you can start by reducing some.
It's fine now , no need for replacement foam , but thanks for replying
what was the solution devang???
All I did was that I removed the rubber bands
Balance your props and get bAlanced motors, buy a anti vibration damper from RcMumbai.com or rcproduct.in I think quadkopter.com also has it check it out
Why can't you get it , it's fine now
Your welcome.