Hi Yogesh.

Sorry but I couldn't understand what you meant by:

Quote from: yogeshkannan on June 19, 2012, 05:22:48 PM
1.why cant you just directly connect the 4 pins in the controller board to the 4 ports in the Rx ?

I wonder if this board including most other MultiWii boards can be called a "Plug-n-Play" board. I think to get a plu-n-play board, you need to shell out more bucks. Probably a paris v3.0 or the DJI FCs qualify as true plug-n-play boards.

 vineet
       
         what i ment was that , u need 4 male to male connectors to connect the Controllers (thr,ele,rudd,ali)  board and Rx !
         how come only 2 male-male connectors are used and why

Yogesh bro let me clear few things. male2male lead has 3 wires.
the lightest color wire is signal wire. Generally darkest color is negative. On hk board pot side signal wire comes first.
Rx gets 5V from the board and board gets 5V from the ESC's BEC. For safety you have to disconnect(don't cut just remove metal pin from the plastic case) red wires from 3 ESCs and keep 1 ESC as it is. Now connect escs to the board. You can do same thing with rx.

Looks good yogesh all the best with the build, I have also build one, it flew nicely but after a hard landing it refuses to fly

Dharmik bhai

        1. the controller board has 4 slots (ele,thr,ali,rud) agree?
        2. the Rx has 7 slots , agree?
         
        3.  (with reference to vineet's photo) why cant you connect the 4 slots of the controller to the 4 slots of the Rx directly ?
        4. in vineet's picture the connections are made in some order ! why ? can you please explain it to me !
       

Sathyagupta bhai , thank you very much
please leave your reviews and suggestions

Quote from: yogeshkannan on June 19, 2012, 08:56:24 PM
        3.  (with reference to vineet's photo) why cant you connect the 4 slots of the controller to the 4 slots of the Rx directly ?
        4. in vineet's picture the connections are made in some order ! why ? can you please explain it to me !       

Its personal preference buddy, you can connect 4 male to male cables from board to Rx or you can connect 2 (as shown by vineet) and thats how most of the quad builders like to do (including me) you see you get the job done with just 2 male to male cables :giggles:

Quote from: yogeshkannan on June 19, 2012, 08:57:32 PM
Sathyagupta bhai , thank you very much
please leave your reviews and suggestions

Will drop comments if i have any relevent information, P.S. there is no 'H' in my name its 'satyagupta' thats my first and last name and i would prefer been called with that no addition/dropping of any alphabets.

For goodness's sake that's not my picture. Just took it from hobbyking's users' files.

Vineet sorry ! :-) satyagupta - sorry man ! Thank you guys :-)

You need not be sorry for that, I was only trying to indirectly say I have not tried an HK v2.1 FC before, and that all I did was googled and gave the info to you.

Waiting to see your quad flying.
Best of luck,
Vineet

Thankyu so much vineet , ill be ordering the radios and battery today !
6ch Tx Rx , and 2300mah 20C or 2600mah 20C battery ,3mm prop adapter (colet type), male-male connectors ,battery charge and Battery, Tx ac/dc adapter!

Yogesh bro i will post my setup pic when i get back to my pc.

Dharmik
   
           yes please ! it will be really kind of you if you post it !

Hey Guys ,
             
               Another question ,
1. how much does an quadcopter kit costs
2. how much does it roughly cost for you people to build a simple quad ?
3.how much does it cost to buil an effective quad (a nice powerful one) ?
4.at what hight can a quadcopter fly (approx) ?
5.how far can a 2.4GHz Tx Rx can controll a quadcopter ? ( length and distance ) !

Guys help needed
   
        can any one tell me how to mount the propeller (10*4.7) on 3mm collet prop adaptor ?
        1. step by step instructions ? or step by step instructions with photos ?
        2. or some video ?
        guys need your help , vineet ?? dharmik ?? satyagupta ?? anyone ?? need help !

hold on making the video


SUbbu

thankyu subbu ...for info ..im using a 3mm collet prop adaptor and i wnna attach it to (10*4.5SF prop)
after that i wanna connect it to CF 2822 motor

got it yogesh

i am posting the tutorial for 3mm collet type adapter and a 8*4SF prop but the size does not matter

sorry i could not take video with one hand so i am making a step by step photo guide

1 - you need to bore the prop hole to increase its diameter (it can be easily done using one arm of a scissor or buy a prop boring tool)
2 - the required items
3 - 3mm shaft motor mounted using clamps and balsa strips
4 - first threaded part is inserted into the 3mm shaft

Subbu

5 - insert the base (i dont really know the exact name of this)
6 - insert the washer/baseplate (dont know its name either)
7 - insert the prop
8 - insert the spinner


Subbu

9 - hand screw the prop spinner
10 - use pliers to further tighten (you can also use a pin or small screw driver to go through the two holes in the spinner and rotate to tighten)

I did not intend this to be a 10 step guide to mounting the prop adapter and prop but as it happens i just did  

hope this helped

Subbu

EDIT - if you still face any problems please ask i shall post a video

thankyou subbu thankyu so much for giving me step by step instructions for me at this late night
and subbu i saw your quad parts , they are really awesome ...how much did you get them for ?? and what is the total thrust given by your motor ??

no problem yogesh i usually go to work on my planes during these hours

hi my each motor produces about 700gms of thrust they are http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=21478

the total cost for all the electronics,accessories,props,controller board(before i was using V3 multi rotor board but now i bought kk2 lcd multi rotor board) is 141.5$ but i got about 15 $ discount as store credit so about 7000rs without ems shipping.


Subbu

So you mean to say is you got everything for just 7000 including the board ?

yes the board, esc, motor, prop, prop adapter, kk2 lcd FC board,male to male leads from FC board to rx, 4000mah 3s turnigy lipo battery and a bullet and deans connectors for about 7500 without shipping from hobbyking.

above price doesn't include the cost of the frame

Subbu

Wat abt the radios ? You didn't get them ?