help me with the connections please

suspension · April 24, 2015, 10:03:53 AM

guys canany of you please tell me how thw connections are from kk 2.1 board to a 9 channel reciever ?

suspension · April 24, 2015, 10:04:44 AM

i dont know which servo wire goes where ... ? please do send me the fotos ...

Darshan for multirotors · April 24, 2015, 10:17:34 AM

What copter are you. Making please specify

suspension · April 24, 2015, 10:21:52 AM

quadcopter ... x configuration

Darshan for multirotors · April 24, 2015, 10:22:02 AM

I will go in m4 I think if you are making a tricopter. .experts please correct me if I am wrong

Darshan for multirotors · April 24, 2015, 10:22:28 AM

You don't need a servo in a quad

suspension · April 24, 2015, 10:23:43 AM

i just want the photos of connections between kk board and reciever...please ... i need it urgetnly ... inbox me if u can ... 7767043546
mail id ...

suspension · April 24, 2015, 10:24:46 AM

servo wires i am talking about not the servo gear which is used in tricopters ,,, just the connections between board and reciever please

Darshan for multirotors · April 24, 2015, 10:28:56 AM

https://www.google.co.in/search?q=tricopter+setup+for+kk+2.1&source=lnms&tbm=isch&sa=X&ei=VM05VYa9NoPw8gXEx4C4Dw&ved=0CAgQ_AUoAg&biw=360&bih=592#imgrc=YxICmnqfVdtPzM%253A%3BLmRvYJwxvw9jOM%3Bhttps%253A%252F%252Fhackadaycom.files.wordpress.com%252F2014%252F08%252Fkk-wiring2.jpg%3Bhttp%253A%252F%252Fhackaday.com%252F2014%252F08%252F28%252Fdroning-on-maiden-flights%252F%3B500%3B395

Darshan for multirotors · April 24, 2015, 10:30:14 AM

https://www.google.co.in/search?q=tricopter+setup+for+kk+2.1&source=lnms&tbm=isch&sa=X&ei=VM05VYa9NoPw8gXEx4C4Dw&ved=0CAgQ_AUoAg&biw=360&bih=592#tbm=isch&q=9+ch+receiver+connections&imgrc=iqHfCX5MZLdOUM%253A%3BB7Stug02Cf2vxM%3Bhttp%253A%252F%252Fimage.dhgate.com%252Falbu_276744036_00-1.0x0%252F10pcs-lot-cm921-9ch-dsm2-dsmx-2-rc-receiver.jpg%3Bhttp%253A%252F%252Fwww.dhgate.com%252Fstore%252Fproduct%252F10pcs-lot-cm921-9ch-dsm2-dsmx-2-rc-receiver%252F142476550.html%3B500%3B501

Darshan for multirotors · April 24, 2015, 10:32:44 AM

Got it?

suspension · April 24, 2015, 10:38:49 AM

no its not helping me .... i mean i have seen those google fotos ... n i cant see from which slot of reciever the wire is going on kk board ...its damn confusing ....

Darshan for multirotors · April 24, 2015, 10:40:19 AM

Which rx do you have

suspension · April 24, 2015, 10:44:56 AM

fly sky 9channel and kk2.1 board

suspension · April 24, 2015, 10:56:42 AM

anyone there please help me ....

Darshan for multirotors · April 24, 2015, 11:01:00 AM

Try this...
Roll to ch1
Pitch to ch 2
Throttle to ch 3
Yaw to ch4

Darshan for multirotors · April 24, 2015, 11:04:26 AM

This should work out

K K Iyer · April 24, 2015, 12:39:04 PM

Photo attached.

And here is the manual
www.hobbyking.com/hobbyking/store/uploads/1026124741X1235859X24.pdf

parichya.gautam · April 24, 2015, 01:10:05 PM

servo and KK2.1 ... dont the servos go in the Rx instead ?

Darshan for multirotors · April 24, 2015, 01:26:13 PM

parichaya sir .. he meant servo male to male extensions for connecting the board to the receiver

suspension · April 25, 2015, 09:21:57 AM

If the connections go wrong will Mt stuff get damaged ?

Darshan for multirotors · April 25, 2015, 11:57:29 AM

just make sure that the black/brown wire is towards the ground and do as i said.. nothing will go wrong
if you dont connect the servo wires properly... then there is a chance that the receiver will get damaged