I bought the last piece of rcbazaar quad kit... Got it in my hands today and soon started my build..
The whole thing was nicely packed shipped..
Just a good quad kit for affordable price...
This is my first quad build... T-copter in progress :'( :'(
Here are some pics of the parcel as well as the quad
sir your phone no?
just pm me plz.
Pics..
Great packing. Nice! :)
Good luck bhaiya.
Everything done now.. need to program the board and solder the esc to the board..
Rc bazzar told me that the board is pre programmed.. is it so? :headscratch:
Some more pics
What battery you using? Where will you put the battery?
it will be 2200mah 35c-50c
Will be putting b/w the two center board...
And the flight controller in the top
Great. I had no space in between so had to put the bat. on the bottom and then when the quad landed, it landed on batteries. so I had to use new landing skid which is made with foam.
Hey Arun looks good. so something about the props. The props on the diagonal side should rotate on same side.
Refer the image, motors { 1 , 3 } and { 2 , 4 } so if you decided that motor 1 is rotate CW then motor 3 should also rotate CW and the other 2 should go opposite.
So if your quad will be in X config (which i would recommend) then front 2 motors should have bright colors (green or orange) and the back of the quad should have a darker shade of props (black) this is my preferences. You can have your own choices, i have same config where green are on the front of my quad and black at the back. This helps a lot which determining the position of your quad when its up high in the sky.
Thats my advice, i will chip in when ever required :thumbsup: :thumbsup:
I was also a bit confused with x and + config now decided to go with x.. and changed the props thanks for notifying me..
Going to install and setup everything once I got your parts.. ;) :thumbsup:
Bhaiya, any update ? :D
Rahul waiting for some hardwares from satya bhai :)
Will be getting by tomorrow
okay..
Happy holi :D I also am waiting for my props from satya bhaiya :) Should I call him that I already made the payment, because he didnot replied to the email yet..
Hence the quad is completed and updated with v4.7 in black board x config...
Flies great.. didnt tested outside.. But its stable enough.. :thumbsup: :thumbsup:
Thanks to dharmik bhai and stya bhai for the help.. :hatsoff: :hatsoff:
Videos coming soon... :) :)
Nice sir. waiting for a video.
What camera do u use to record videos?
nikon d3100 :)
my connection is dead slow now.. will upload later and post..
Actually the video is the testing one.. not fled outdoors yet..
no probs, upload that one only, I wanna see it.
And your camera is so cool. Its a DSLR :O {:)} {:)} :thumbsup:
Waiting for The flight test Arun.
good going
Thanks swiz will do it by tomorrow.
;)
Here is the maiden(Testing)
Need to travel a lot for a stable flight.. Flying a quad for first time ever(actually not flies :giggle: :giggle:)
http://www.youtube.com/watch?v=1wupQL7tBu0&feature=youtu.be
i have purchased the same quad from same shop is control board comes pre programmed or i have to program it....and if i have to program it please tell me how to program it...
Its pre programmed but I flashed it with 4.7 v