omg !!

QuoteIs there a video of what happens when all motors on quad are spinning in same direction? Just because I wondered what would happen if they do 

If you're using RH and LH props, two props going the wrong way will most likely snap or fly off, and the quad royally screwed.
If you're using only one sides props, you will still get lift but the quad will spin about the y axis like a clothes dryer. Give a control input and it is doomed.

I'vent done this, makes little sense to do it, but that assumption is based on the laws of physics.

PS: good you figured it out early, I spent days to understand when i flashed a + with a tri, all because I the tooltip on the KK flash tool was coming up in black and not visible; I was clicking on the wrong button all the time.

Hey Guys.. A new problem have arrived now. When I connect my USBasp it comes Unknown USB Device(Invalid Device Descriptor . Does anyone know why? The drivers don't get installed.

Have you tried using the USBAsp on a different computer/port?

Let me check.

This is what comes.
Flash the firmware from repository.

C:\Users\Vedant.VedanT\Downloads\kkmulticopterflashtool_0.72\lib\avrdude\windows\avrdude.exe -C C:\Users\Vedant.VedanT\Downloads\kkmulticopterflashtool_0.72\lib\avrdude\windows\avrdude.conf -p m328p -P usb -c usbasp -B 8 -e -U lfuse:w:0xe2:m -U hfuse:w:0xd9:m
avrdude.exe: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl.de' product='USBasp'

avrdude.exe done.  Thank you.

Error during setting the fuses.
Flashing of firmware aborted.

Please

Finally it worked. y doubt was correct.