How are you fellow RCIndians, this is my build of an all black T3 or T copter aptly named ST3EALTH copter.
It flies really well with just a standard kk mini and i would soon be making v2 with better electronics.
Frame details:
M2M- 480mm
Main plates- 1.5mm Fiberglass
Screws-M3x25(7 pieces)
Arms- 13mmx13mm Pine Wood(Source QuadKopters)
Electronics:
Flight Controller: KK Mini
Motor: SunnySky X2212(Clone
ESC: Xrotor 20A
Prop: 1045 gemfan
Lipo: Gens Ace 2200mAh 3S 30C
Servo:
TX/RX- 9X with R6B rx
Hope you guys enjoy going through the build pics i will upload video of maiden soon.
Here are the rest of the pics, to see the original picture please right click on the image and open in new tab
(Images are big so if you have a slow connection please only view what you would really like to see in higher res) :)
(http://s19.postimage.org/q3d3uccyn/DSC02709.jpg) (http://postimage.org/image/q3d3uccyn/)
(http://s19.postimage.org/gwut727q7/DSC02711.jpg) (http://postimage.org/image/gwut727q7/)
Ready for paint, chose a Flat black paint.
(http://s19.postimage.org/5g1fcban3/DSC02717.jpg) (http://postimage.org/image/5g1fcban3/)
(http://s19.postimage.org/cxamrj067/DSC02716.jpg) (http://postimage.org/image/cxamrj067/)
Drying off, sprayed the kk mini case too.
(http://s19.postimage.org/s7ahypvof/DSC02723.jpg) (http://postimage.org/image/s7ahypvof/)
(http://s19.postimage.org/5wmmyqye7/DSC02722.jpg) (http://postimage.org/image/5wmmyqye7/)
Test Fitting the components.
(http://s19.postimage.org/4vme9mhen/DSC02720.jpg) (http://postimage.org/image/4vme9mhen/)
Frame plates ready to be assembled
(http://s19.postimage.org/961257mhr/DSC02728.jpg) (http://postimage.org/image/961257mhr/)
SunnySky X2212 with wires braided and covered with mesh
(http://s19.postimage.org/wupqryxsv/DSC02754.jpg) (http://postimage.org/image/wupqryxsv/)
All components used in the build
(http://s19.postimage.org/az3ytj7of/DSC02724.jpg) (http://postimage.org/image/az3ytj7of/)
(http://s19.postimage.org/3xaml2tgf/DSC02735.jpg) (http://postimage.org/image/3xaml2tgf/)
1250MG servo
(http://s19.postimage.org/ctlep0k2n/DSC02737.jpg) (http://postimage.org/image/ctlep0k2n/)
Screws and PDB
(http://s19.postimage.org/owqqckv4v/DSC02734.jpg) (http://postimage.org/image/owqqckv4v/)
(http://s19.postimage.org/gsim7u8pr/DSC02736.jpg) (http://postimage.org/image/gsim7u8pr/)
KK Mini with buzzer
(http://s19.postimage.org/g49row9zz/DSC02733.jpg) (http://postimage.org/image/g49row9zz/)
3A UBEC
(http://s19.postimage.org/7na9dz5b3/DSC02732.jpg) (http://postimage.org/image/7na9dz5b3/)
XRotor 20A ESC
(http://s19.postimage.org/zbwwlhsbj/DSC02738.jpg) (http://postimage.org/image/zbwwlhsbj/)
(http://s19.postimage.org/no2uqy36n/DSC02739.jpg) (http://postimage.org/image/no2uqy36n/)
Components of the frame.
(http://s19.postimage.org/u31vnm9wf/DSC02740.jpg) (http://postimage.org/image/u31vnm9wf/)
(http://s19.postimage.org/spa8sban3/DSC02741.jpg) (http://postimage.org/image/spa8sban3/)
Props
(http://s19.postimage.org/pwlmm0zof/DSC02742.jpg) (http://postimage.org/image/pwlmm0zof/)
(http://s19.postimage.org/lbzg73fz3/DSC02744.jpg) (http://postimage.org/image/lbzg73fz3/)
Receiver.
(http://s19.postimage.org/gelvlzdzz/DSC02743.jpg) (http://postimage.org/image/gelvlzdzz/)
Battery strap and Motor mounts
(http://s19.postimage.org/we4j5ja1r/DSC02749.jpg) (http://postimage.org/image/we4j5ja1r/)
(http://s19.postimage.org/qegs1vp9b/DSC02750.jpg) (http://postimage.org/image/qegs1vp9b/)
Tilt Mechanism(rcexplorer style)
(http://s19.postimage.org/p0p56kpzz/DSC02757.jpg) (http://postimage.org/image/p0p56kpzz/)
Servos for Super Simple Gimbal
(http://s19.postimage.org/xligxr067/DSC02755.jpg) (http://postimage.org/image/xligxr067/)
Landing Gear and SSG Plate
(http://s19.postimage.org/xzjsxck9r/DSC02756.jpg) (http://postimage.org/image/xzjsxck9r/)
(http://s19.postimage.org/cr64fx5sv/DSC02758.jpg) (http://postimage.org/image/cr64fx5sv/)
(http://s19.postimage.org/6evkjts4f/DSC02760.jpg) (http://postimage.org/image/6evkjts4f/)
(http://s19.postimage.org/kzcnenn33/DSC02759.jpg) (http://postimage.org/image/kzcnenn33/)
ESC's soldered with new wires, to maintain the all black look have used only black wires.
(http://s19.postimage.org/3ncat7tlr/DSC02762.jpg) (http://postimage.org/image/3ncat7tlr/)
(http://s19.postimage.org/umg5odg2n/DSC02761.jpg) (http://postimage.org/image/umg5odg2n/)
(http://s19.postimage.org/9e2h6y1lr/DSC02763.jpg) (http://postimage.org/image/9e2h6y1lr/)
(http://s19.postimage.org/qsmpf7yqn/DSC02764.jpg) (http://postimage.org/image/qsmpf7yqn/)
All components soldered to PDB
(http://s19.postimage.org/6zalmilcv/DSC02765.jpg) (http://postimage.org/image/6zalmilcv/)
Battery Cable
(http://s19.postimage.org/z0on07qn3/DSC02768.jpg) (http://postimage.org/image/z0on07qn3/)
(http://s19.postimage.org/ydpqaotr3/DSC02769.jpg) (http://postimage.org/image/ydpqaotr3/)
(http://s19.postimage.org/85jniffz3/DSC02772.jpg) (http://postimage.org/image/85jniffz3/)
(http://s19.postimage.org/5cqfyefmn/DSC02770.jpg) (http://postimage.org/image/5cqfyefmn/)
(http://s19.postimage.org/bey2ow42n/DSC02773.jpg) (http://postimage.org/image/bey2ow42n/)
Motors Mounted to arms(Note the vinyl covered silicon tube used to prevent zip ties from biting too deep into the booms)
(http://s19.postimage.org/ulb9s2kkf/DSC02775.jpg) (http://postimage.org/image/ulb9s2kkf/)
Final assembly
(http://s19.postimage.org/c70qo389r/DSC02777.jpg) (http://postimage.org/image/c70qo389r/)
(http://s19.postimage.org/b60hyyra7/DSC02778.jpg) (http://postimage.org/image/b60hyyra7/)
(http://s19.postimage.org/pdq6nm3z3/DSC02784.jpg) (http://postimage.org/image/pdq6nm3z3/)
(http://s19.postimage.org/45ci66pi7/DSC02780.jpg) (http://postimage.org/image/45ci66pi7/)
(http://s19.postimage.org/v4gd1cbz3/DSC02782.jpg) (http://postimage.org/image/v4gd1cbz3/)
Maidened ;D
Very nice build. please post video if you have.
Thank you dharmik sir, will post video of maiden tomorrow :salute:
Sorry for the delay here's the maiden video ;D:
15:17- Aerobatics
18:30-Crash :P
https://youtu.be/tiTZzAzmLMY
Nice bird you got. Good aerobatics.
Thank you Dharmik sir :)
again!!?! WAH! want another motor? :P
Nah man all good thanks for the spare ;)