Guys, I have started to build my quadcopter.
Below are the parts bought so far:
KK 2.1.5 controller - eBay.in
Alien 500 frame - aliexpress.com
Flysky Radio receiver/transmitter - amazon.in

Please feel free to contact me if you have any parts to sell or suggestions.
I will update the post as I progress.
Thanks.

Edit: I bought this parts before I knew this group existed. Also anyone from Hyderabad know where I can buy the parts locally. I normally go to Gujarati gali in Koti to get some parts.

Good luck with your build

Have you decided on motors ?

Thanks and No, not yet @sooraj. Any suggestions welcome.
Need motors that will eventually lift a small video camera:)

Go for the sunny sky 980 or 900kv. Very good and we'll priced motors and available locally at quadkopters.in or RCMUMBAI.

[Admin Note] Unnecessary quote of just prior post removed. Please use "Reply" (or the "Quick Reply" box at the bottom) instead of using "Quote" while responding to the last post in a thread.
Thanks @ashimda, added it my list.
Is www.quadkopters.com same as quadkopters.in?

These motors http://www.quadkopters.com/product/brushless-motors/sunnysky-angel-2212-980kv-brushless-motor/

Instead of Sunnysky Angel motors, I would suggest to go for these, if you have the enough budget : http://www.quadkopters.com/product/brushless-motors/sunnysky-2216-11-900kv/   or this : http://www.quadkopters.com/product/brushless-motors/sunnysky-2212-980kv/

I think Ashimda sir also mentioned these motors .

If you are low on budget, then you can opt this : http://www.quadkopters.com/product/brushless-motors/221213-1000kv-brushless-outrunner-motor-with-mount/ - this motors provide enough lift for an AUW up to 1.6Kg .

P.S : All these motors are way llot cheaper if you buy outside India !

@sooraj Thanks. OK I will go with 2212-980kv. Any idea what is different from 2216 and 2212?
Regarding buying outside, you mean online or physically?
Edit: I saw the difference from the site.

Just saw this in eBay, any comments on this
https://m.ebay.in/itm?itemId=301535934199

Sunnysky 2216 motor gives more lift and can handle up to 12 " props and is more efficient too , while with a 2212 you can only go with 10" or 11" props.

By, 'buying out side' - I meant online. (ebay, aliexpress , banggood ....)
Check this for eg : http://www.banggood.com/XXD-2212-750KV-Outrunner-Brushless-Motor-for-RC-Quadcopters-p-961973.html

Quote from: jsquadman on March 01, 2015, 08:21:07 AM
Just saw this in eBay, any comments on this
https://m.ebay.in/itm?itemId=301535934199

Good combo - but 4 of such pairs will cost a heck , for that money, I can build a whole quad !!

Stick to sunnysky.
donkey motor is donkey only.

Quote from: sooraj.palakkad on March 01, 2015, 08:28:03 AM

Quote from: jsquadman on March 01, 2015, 08:21:07 AM
Just saw this in eBay, any comments on this
https://m.ebay.in/itm?itemId=301535934199

Good combo - but 4 of such pairs will cost a heck , for that money, I can build a whole quad !!

OK, looks like that's too expensive

Quote from: pravesh736 on March 01, 2015, 08:30:57 AM
Stick to sunnysky.
donkey motor is donkey only.

Thanks for the feedback, will go with sunnysky.

Planning to buy the below battery and charger
1. 3s 2200mAh 70C Wild Scorpion Nanotech lipo battery (http://rcmumbai.com/index.php/product/3s-2200mah-70c-wild-scorpion-nanotech-lipo-battery/)
2. Imax B6 (http://rcmumbai.com/index.php/product/imax-b6-copy/)

Appreciate your comments or any other combination of battery and charger recommended?

Are the selected charger and battery  compatible?

There is no need for such a high C rating battery. 20-30C in enough. Spend 400/- bucks more and get the http://rcmumbai.com/index.php/product/3s-4200mah-30c-wild-scorpion-nanotech-lipo-battery/ longer flight times and enough punch for your setup.

@ashimda thank you sir for your feedback. I will go with your recommendation 

Here is the motors I am planning to buy from banggood

Honestly speaking, You Get What You Pay For. You are spending approx 4200/- on Motors and ESC's where as 4 good quality motors cost about 4000/- alone. Any good quality 750kv motor would cost 4x as much as the BangGood ones. But there's a reason for that. Well balanced with quality bearings and the option to go 4S are just a few.
If you haven't yet purchased them, I would have a rethink.

[Admin Note] Unnecessary quote of just prior post removed. Please use "Reply" (or the "Quick Reply" box at the bottom) instead of using "Quote" while responding to the last post in a thread.
No Sir, I havent purchased them. I have put them in cart to get feedback from the veterans here. Definitely, I dont want low quality, at the same time it I dont want to spend a fortune on it. Any mid quality motors will do for now, as this is my first quad and more of a learning experience.

Any feedback on this 4in1 ESC ?
http://rcmumbai.com/index.php/product/multirotor-4in1-esc425a/

http://rcmumbai.com/index.php/product/multirotor-4in1-esc430a/

Updated parts going to buy based on valuable feedback 
Not sure if I should go with 4in1 ESC or individual 

currently using emax 2216 810kv motors.. good motors. very less vibrations , you can use props between 9'' to 12'' ( they are available in both thread cw and ccw for self locking props.)
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=1470
(these motors provide enough thrust to lift my quad at almost 60-70% throttle weight around 1.3kg with 3s battery and 9443 self locking props)
i also try my hands on 2212 motors but 2216 gives better performance as compared to 2212 ( also these can handle more weight than 2212 for future upgrade)
goodluck

regards

go for these ESC http://www.quadkopters.com/product/esc-ubec/simonk-esc-20a/ (4 individual ESC)
instead of buying 4 in 1 ESC..

regards

[Admin Note] Unnecessary quote of just prior post removed. Please use "Reply" (or the "Quick Reply" box at the bottom) instead of using "Quote" while responding to the last post in a thread.
Thanks @gunnu.
Was looking for 30A as I am not sure about the motor capacity. How about this http://www.quadkopters.com/product/esc-ubec/simonk-esc-30a/ ?

hmmm i am using this ESC but currently out of stock.. emax simonk 30A esc are also good.. check this link
http://rcmumbai.com/index.php/product/simonk-30a-esc/
(for multirotor always use simonk flashed ESC)

[Admin Note] Unnecessary quote of just prior post removed. Please use "Reply" (or the "Quick Reply" box at the bottom) instead of using "Quote" while responding to the last post in a thread.
OK, noted and changed to separate ESC.