Hey,
This is the first review/build for the new tarot fy690S which is new to the market.
Thanks to saurabhsrivastava sir, for getting it for me.
I will use the following components-
APM 2.5 (rctimer) with GPS and telemetry 433mHz Bought from aditya sir :)
and motors 2814 700kv
+ other hardware ( from hobbyking)
Here are some pics of the box
(https://www.dropbox.com/s/b3pjt3l10qc0l11/20130715_201820_resized%20%281%29.jpg)
(https://www.dropbox.com/s/k9pph8n4cw4yy3r/20130715_201756_resized.jpg)
(https://www.dropbox.com/s/uiaswfkgkmdfdtx/20130715_201907_resized%20%281%29.jpg)
More pics soon coming after the build
Regards,
Rahul
a 3d view video with closeups-
http://www.youtube.com/watch?v=t3uVEIXyVAI
Are you gonna use ccw props here? Thats an awesome looking frame.
Same tool kit here ;D
i will use both CW and CCW props!
hmm ya, very nice frame!
But you are going to put the motors to spin props upside down right? Any advantages you see in that config?
Also this is really going to look sweet up in the sky. Sorry for disturbing thread. Hope everything goes well. ;D
lol, you are not disturbing bro ;)
i think I will place the motors upside down, different from other multirotors!
I believe it will be more stable.
I hope that flies well :)
Nice!!! Thats why i asked if you will be spinning props below motor mounts. Looks cooler than the standard config ;)
And Brushless gimbal?
Frame looks nice :) . What ESCs are you using?
Brushless gimbal next month or after next month as currently i should fly it first!
ESCs are plush 25A. :) thanks !
How much for the frame? Where did you buy it from?
Did you solve your APM input problem?
Yup solved, and thanks for helping.
I just soldered the resistor on the left of ch2 input to the ch2 PWM pin, to connect them.
frame is for ~15k including shipping. Bought it from infinity-hobby.com through saurabh srivastava sir :)