I would sharing the up-gradation build log of my FPV frame which i had earlier built
http://www.rcindia.org/multirotors/working-on-new-fpv-frame-for-my-multirotor/ (http://www.rcindia.org/multirotors/working-on-new-fpv-frame-for-my-multirotor/)
I am upgrading my frame booms from 13mm aluminum to 15mm CF square rods. And GF sheets to CF sheets (1.5mm)
And FC from KK2.1 to APM Pro
pictures of the frame build so far
CF sheet and rods
(http://s20.postimg.org/bgp4w1jfd/20150426_122551.jpg) (http://postimg.org/image/bgp4w1jfd/)
After CNC
(http://s20.postimg.org/gunx3l95l/20150426_122738.jpg) (http://postimg.org/image/gunx3l95l/)
Booms i am routing the wires within the booms it makes it less messy
(http://s20.postimg.org/9tzxat7dl/20150426_122751.jpg) (http://postimg.org/image/9tzxat7dl/)
(http://s20.postimg.org/pqyp7izrt/20150426_122757.jpg) (http://postimg.org/image/pqyp7izrt/)
I made a small Board camera mount using CF sheets
(http://s20.postimg.org/babfsyaah/20150426_122859.jpg) (http://postimg.org/image/babfsyaah/)
(http://s20.postimg.org/n732dfc7t/20150426_124023.jpg) (http://postimg.org/image/n732dfc7t/)
All together
(http://s20.postimg.org/4cbx0r1jt/20150426_124028.jpg) (http://postimg.org/image/4cbx0r1jt/)
(http://s20.postimg.org/3vm40koex/20150426_124032.jpg) (http://postimg.org/image/3vm40koex/)
Using little micro servo (emax 9 frame metal digital) to control the tilt mech
(http://s20.postimg.org/uw4i2w23d/20150426_124045.jpg) (http://postimg.org/image/uw4i2w23d/)
(http://s20.postimg.org/q8yg14eqh/20150426_125631.jpg) (http://postimg.org/image/q8yg14eqh/)
And the best part the frame arms can be folded :thumbsup: :giggle: :giggle:
(http://s20.postimg.org/mt6brkhi1/20150426_125657.jpg) (http://postimg.org/image/mt6brkhi1/)
looking great...
Nice one satya sir :salute:
Thanks guys, next set of update by weekend :thumbsup:
satya sir is this the x copter which you had posted on youtube??
which video in youtube?
https://m.youtube.com/watch?v=uVsU1A9CHFM
ya, thats the old frame. this one is same design but some what upgraded.
Sir
Please post the flight video when done :salute: :hatsoff:
UPDATE:
http://www.youtube.com/watch?v=UKY3scPIMd8#ws (http://www.youtube.com/watch?v=UKY3scPIMd8#ws)
If you are seeing device support then here is the link: https://www.youtube.com/watch?v=GixxaVzPibI (https://www.youtube.com/watch?v=GixxaVzPibI)
Almost ready, final configuration and touchup.
I am having some issue please check the video and let me know what could be the problem :headscratch:
Look like something wrong with power supply. may be because its powering using common BEC for all of them.
Exactly i was thinking the same, cos if i connect servo to different receiver no problem. I will use a different power supply for servo and update. Thank you Akhil