So sorry for my irresponsive reading but really found a 200 mw vtx and rx  for 1300 bout 2 months ago hope i will again find it .

Nice Build. It looks great in all Black. What bout the Props, I ve heard that 3 blade props produces vibrations. How was your flight.

Well Tanmay, don't worry on it dude Thanks for your help (Not all people will share what they know - only some helpful guys do that)

Quote from: samlikespad on January 04, 2015, 12:09:34 PM
Nice build Sooraj 

I liked your coat-hanger landings skids  May be its a better idea to change their orientation assuming your quad is facing towards the Yellow Only/Or Black Only directions. Hope to see video soon.

Thanks Samlikespad , Sir the Credit for Coat hanger landing skid and all the uses of hanger in multirotors goes to Akhilzid (cochin) in this forum Check out the other use he have found with metal hangers

Well me too planned to change orientation, I have put the old bottom plate as top plate now (Hence decreased height more stability while landing), hangers are attached to this top board if I take the other side as front, the copter is not good looking so kept it this way - will change it once I change the top plate .

For the video, I don't have a cam right now, but I think I have uploaded my flight videos before upgrading the frame. will post links again soon

Quote from: miginstruments on January 04, 2015, 12:40:58 PM
Nice Build. It looks great in all Black. What bout the Props, I ve heard that 3 blade props produces vibrations. How was your flight.

Sir   3 Blade props are more smooth and silent than my old two blade ones, better response too . For vibrations, I don't know, because I don't really cared about it, still this upgrade is worth it

Links to flights with KK2.0 (consider muting audio ) :

My first successful flight : www.youtube.com/watch?v=6FSuqgml5hI


www.youtube.com/watch?v=ipD0x466kuU

After Fine tuning :  www.youtube.com/watch?v=ldRUtiPZzWA

Okay Thanks for the Information. Someday I ll try my hand on 3 blades. Good Thinking, Good Going, Keep it On.

Nice flying dear, I have seen the first video before and was laughing all the way because of your camerawoman (guess it was your little sister "chettaaaa ingottu konduvaralleeeee"). I recently setup a KK2 quad for a fellow flier at our field and was quite impressed at the ease of doing one.

Yup!, My sister covered the Video (First one only) , and The Girl Who runs and Hide behind the wall is my neighbor .
KK2 is really easy to set up, a PC is not needed at most cases (If the board has correct F/W on it) - we can change motor config. and layout from the menu itself - which is an awesome feature .

Ha ha got it will soon find the rx   www.banggood.com/FPV-5_8G-200mW-Wireless-Audio-Video-Transmitter-Module-TX5823-p-84780.html

Here comes the rx  www.banggood.com/FPV-5_8G-Wireless-Audio-Video-Receiving-Module-RX5808-p-84775.html

Hi Tanmay, nice findings. Are these the actual boards inside Boscam Receivers and Transmitters minus Antennas, Aluminum covers and switches?

These boards are expected to work as an FPV system once we put in antenna, and Heat sink for safety , It will be using same chip set of Boscam (Hence the model number) - But it is not of Boscam brand and reliability won't be guaranteed .

@Samlikespad, Sir, Cheap complete FPV system are available in ebay.com and Aliexpress- cheaper than Hobbyking

I think they are boscams. But we can make clover leaves at home like the I.B. Crazy's and the wiring is quite easy its just needs some basic simple soldering. 

These the antennae www.banggood.com/5_8G-4-Leaves-Mushroom-Omnidirectional-Gain-Antenna-For-Receiver-p-922645.html