Best flight controller for multirotor

Started by knvshrm, May 07, 2018, 09:47:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

knvshrm

Hey I has a f450 quad but the kk board has lots of problems and defects. Can anyone suggest a flight controller ?
Regards

AL HAM SHARI

There is no specific best fc. It depends. If you just want normal alt hold etc. Kk boards are best. I know many flyers using kk boards without any problems. If you want a higher level autopilot, use apm, it's cheap too. If you want to have the apm level usability and want lesser hassle , if you are willing to shell of some extra money go for DJI naza. I've heard that Naze32 is a very good board.
A Dozen Scratch Built Models , 
VT-Speedster Pro
55' UAV Wing
Model  Rocketry

nite

Dji Naza and pixhawk both are good only if wanna expand your quad capabilities in future and spracing f3 or some other cheap f3 boards are also good if only want to enjoy flying not meant for aerial photography
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

knvshrm

Hi guys I just want a FC for basic use such as alt hold etc and which is easy to program. So which specific FC do you recommend ??  I will be using this on a 450 sized quad.

knvshrm

Should I go with apm 2.8 or kk 2.1.5 ?

Balakrishna Reddy

If you want good autonomous flight experience then Ardupilot is good. But APM boards are no longer supported so it is not of much use.
So I would suggest KK 2.1.5 which is both cheap and also have minimum required functionalities.

kn8alpha

Go for APM which has a baro built in. You will definitely love the APM flight controller's flexibilities compared to KK

jovino

Even tarot zyx iz not bad. 

Sent from my F1f using Tapatalk