battery in tx dead and even tx not working .

Started by ikishan, May 03, 2013, 12:22:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

ikishan

May 03, 2013, 12:22:34 PM
what went wrong ???
the charge in the battery was completely off , i did not recharge or unplug the battery from the tx   :headscratch:
whats wrong here :-\
1.not unplugging the battery from the tx  8-)
2.not re charging the battery  8-)
its a fly sky 9ch  :banghead:

ikishan

#1
May 03, 2013, 12:23:38 PM Last Edit: May 03, 2013, 12:30:16 PM by iamahuman
[Moderator's Edit] Chain posting is not allowed. The duplicate thread has been merged with this one.

santhosh-r

#2
May 03, 2013, 03:20:02 PM
Not recharging the battery ...

Even if you don't unplug the battery from TX..it does not damage the TX...as only overvoltage fries electronics not undervoltage
Spektrum DX6i | Phoenix V4 | CoroTrainer | Tamiya Baja king 2WD | RCTimer F450 Quadcopter

lastRites

#3
May 03, 2013, 04:24:50 PM
What kind of battery? It is impossible to answer your question without knowing.
It is the pervading law of all things organic and inorganic,
Of all things physical and metaphysical,
Of all things human and all things super-human,
Of all true manifestations of the head,
Of the heart, of the soul,
That the life is recognizable in its expression,
That form ever follows function. This is the law.

paladugu_sujith

#4
May 03, 2013, 07:36:06 PM
Yes. What battery is it?. If nicd it can be recharged again. But if lipo . its probably dead by now. Change the battery pack and check. Make sure u put the polarity right or u will fry or tx board.

ikishan

#5
May 06, 2013, 08:39:04 PM
yes thats what i thought but one of my friend compared it with a dslr camera scenario, that we take off the battery once the charge is up.  :headscratch:

ikishan

#6
May 06, 2013, 08:42:08 PM
its a lipo 12V .. and the tx has a direct charge in pin..

santhosh-r

#7
May 06, 2013, 08:58:36 PM
Direct charge in pin is supposed for NiCd and NiMh batteries and not Lipo ..because Lipo need a special charging algorithm and balancing.
Spektrum DX6i | Phoenix V4 | CoroTrainer | Tamiya Baja king 2WD | RCTimer F450 Quadcopter

ikishan

#8
May 07, 2013, 01:29:02 AM
sorry no exact info on the battery ... so just thought of it , so can i make the battery work.. if yes how?

lastRites

#9
May 07, 2013, 09:57:54 AM
That makes no sense. You just thought of what?
An apparently dead LiPo can be recovered with slight damage to the cells.
It is the pervading law of all things organic and inorganic,
Of all things physical and metaphysical,
Of all things human and all things super-human,
Of all true manifestations of the head,
Of the heart, of the soul,
That the life is recognizable in its expression,
That form ever follows function. This is the law.

ikishan

#10
May 07, 2013, 11:32:57 AM
firstly it dosent have any thing written on it so i thought it is might be a lipo , but as i mentioned tx has a direct charge pin so now it make sense it should be NiCd or NiMh ..... { sorry i was confused }
my only doubt now is can a NiCd or NiMh leak out and damage the Tx???
Print
Go Up Pages1
User actions