What are the capacitor used in flysky receiver chipset
A capacitor is burnt.. Plz help me out
There was two yellow capacitor but due to burning one became black
The voltage regulator is a Alc1734. From the datasheet, capacitor across input terminal is 1μF.
However, it's highly unlikely that it's just the capacitor that has blown. Usually, the voltage regulator would also have the impact.
For a quick check... Power up the receiver normally and see if it works. If it doesn't, you'll also have to replace the voltage regulator.
I have same Rx the burnt capacitor labeled as .226c 82j42
It means it is .22 micro farad don't know about other numbers.