can we use R/c car's leftovers for a r/c plane?

Started by topalle, July 17, 2012, 07:47:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

topalle

 i have many r/c cars (made in china cheapos :Rs:) ;D ;)

i was thinking i can manage to make an r/c plane without buying a separate controllers set. this would make my model damn cheap... if this can work, what would be the range?

the controllers are all 27 mhz.

also, i am planning to construct a junk 747 or 787   can these work for it? :help:  :-\
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

iamahuman

Nope. They won't work because they are 2 channel car radios.
"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

topalle

#2
Can't we use two of them?

Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

iamahuman

"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

topalle

is there any reason why not??? pls justify...
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

iamahuman

You'll need at least 4 channels to fly a plane. If you think two, two channel car radios are going to work, it will be impossible. You will need an aircraft style transmitter to fly a plane.

"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

topalle

 but if i can control two motors with one controllers, then i can control 4 mtors using two controllers
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

abhay

Dear topalle, there can be many reason for this:
1: +1 with iamahuman(regarding channels)
2: these controllers work in 1,0,-1 manner. i.e. either they switch off the motor, or they turn the motor in a particular direction, but with a fixed speed.
for aircraft, you need variable pitch for throttle and controls.
3: the range, you will get with chinese radios is merely 200' at maximum.
I can take off and fly well. Its landing which sucks :banghead::banghead:

topalle

 thanks ...then what would be the cost of a basic airplane controller?
Amateur photographer ... DIY enthusiast ... Scratch Builder... Student-Innovator

iamahuman

#9
The RC Gems will have all your answers. Do some reading and research...
"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.

pradeepdasgupta

Quote from: iamahuman on July 17, 2012, 09:38:30 PM
You'll need at least 4 channels to fly a plane. If you think two, two channel car radios are going to work, it will be impossible. You will need an aircraft style transmitter to fly a plane.


Hi Iamhuman
This is not to contradict anyone but just as a matter of interest for all. Back in the late sixties when RC was out of reach for all of us CL, free flight and glider flyers, one in our group (a catholic priest) had a Pulse RC system. The Tx was a small metal box with one button, a switch and an antenna. One push on the button turned the aircraft left and two quick pulses turned it right. Once launched, you had to fly the aircraft till it ran out of fuel. You maintained altitude by going into steep turns.
So maybe you don't need 4 channels to fly an aircraft always. Maybe an innovative DIY person can cannibalise RC cars to make a flyable 2 channel aircraft. Definitely not a twin engine, and ofcourse the range will be really short. But can it work?

iamahuman

I have my doubts. A toy car transmitter won't have proportional control like Abhay mentioned.

First of all, it would be near impossible to use.

Like Abhay said, the range on those radios is abysmal when you need to fly an aircraft.

Even if you were to use a really good 2.4GHz hobby grade car radio, the range would not be enough to fly an aircraft effectively.( Maybe with the exception of the Sanwa RDS8000 which can be used as a crawler radio)

"Chuck Norris once overcharged a lipo. Thank him for the Sun."

SSC LCG Slash 4x4.
JQ THE eCar.