HI ALL

which transmitter set would be best to begin  

AMONG THESE 2 ??

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=16239

OR

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042


please suggest !




thanks

My suggestion Buy the second one.Bcz there is no option to buy separate rx for 1st product.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=16239

- It has on board Servo Reverser etc. HK would soon offer spare Rx I bet.

But for little more money, you can get a branded Tx/Rx system with full  computer Radio, model memory for Trim, setting etc.
Sanwa SD5 or SD6 from RC Dhamaka

http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=89&products_id=703
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=89&products_id=704


If you are really pressed against budget, at least get this one from HK:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8992

If you have a medium to long term plan in RC, investing in a decent Radio is very imp.

You should really consider buying one locally, as customs is getting more and more strict about tx imports.  Many of the HK radios are being offered locally now, at prices that are decent (considering shipping and customs costs).

And of course, Sanwa/Airtronics, if you are after higher quality and longevity.

You have two option,

1. buy a cheaper one today, and flip it for a more reliable one latter.

2. Buy a reliable radio today and have a relexed rc flying for longer period.

I opted for 2 option and saved the amount which I might have spent on a cheaper radio. Go for tested FHSS technology.

This is my stronger suggestion to devote some time to read some gyan from below site

http://www.rcmodelreviews.com/spreadspectrum01.shtml

hello all

decided to buy Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) locally
as anwar sir suggested  Many of the HK radios are being offered locally i checked  in
WWW.rc electro.com

here i have a question to all of those who uses the Turning 9X  !
have any body faced any serious problem or other kind problem  ??

IS it a right selection ??

Any ISSUE WITH THE RADIO PLEASE LET ME KNOW





Thanks!

I guess for that budget it is a good choice but for a couple of thousand more, the Sanwa 6ch is definitely a better choice.

I would buy a good transmitter, like a 6, 7 or 8 channel one, if I were you. Even though you are a beginner now, you will eventually progress to intermediate/advance. That time, you wont regret buying a quality 7ch/8ch Tx. Trust me , its worth spending more money on a quality Tx. Do more research, google it..

Whatever you buy, make sure you wont regret buying it

Foamybuilder wouldnt agree. He has a HK4ch and has been in love with it since years and still uses it

Same with me. I recently acquired a Sanwa 5ch computer radio and love it  . And I'm pretty sure it's gonna suffice me for the next couple of years.
From a beginner's POV (i.e. mine!), it is simple enough and has sufficient no. of features. Also it requires only 6 AA batteries (while the chinese radios need 8 ).

@banboy10:
Don't go for cheap chinese radios, I made the same mistake a year ago and am really really regretting it now.
The Sanwa SD5-G 2.4Ghz is priced at  :Rs:5,750.00 on RCDhamaka. You can check it out here:
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=89&products_id=704
   

thanks all for reply


i would love to buy Sanwa SD5-G 2.4Ghz BUT the problem is it is not in stoke
where as i need a TX/ Rx before 30th of this month
that's why i choose this radio


where as the Sanwa/Airtronics SD6-G 2.4Ghz W/6Ch Rx is in stock ( but it is out of my budget )

getting more and more confused 

finally bought the turnigy 9x need hwlp with programing!!!


looking forword to it