i have fs-t6. it runs rechargebale cells. but said cell exhaused very soon.
kindly suggest how to install lipo in lieu of cells. and what configuration

kp

try 2500 mah rechargeable cells, but if you really want lipo then measure the cell bay of your tx LxBxH, find a suitable lipo.
try robu.in, they have a good inventory of lipos

go for LiFe battery if you find any. I am using it for about an year now. no issues at all. just keep red lead orientation proper everytime you plug battery to Tx.

http://www.edallhobby.com/en/19-zippy-lipoly

Hi Kamal,

Even I just got a FS-t6 and am planing to do the lipo mod.
With Sooraj's guidance and a whole lot of searching, I bought a Wolfpack 2200mah 8C 11.1V lipo from Vibranthobbies - Currently the site is down for maintenance.
Goto Lipo section page 2 and scroll to the middle- you will find the same lipo Rs.980

Have got this at home and fits perfectly into the case.

After you get it, just grab yourself a male 3 pin servo extension wire and solder it to the battery terminals.

That should do it.

Regards,

Sorry - A slight correction,
It is not Vibranthobbies it is www.RCBazaar.com and it is up and running.
Dimensions of the battery are - 102x40x12 mm

Regards,

@kamalsahai,
You may find this useful:
http://www.rcindia.org/radios-and-receivers/lipo-for-tx/msg221761/#msg221761
Regards.