When I start my Futaba 6ex and powerup R617FS receiver, red led in receiver starts blinking.
Servos are working fine.But it should continuously show greed led as per manual.
No indication has been given in manual for red LED blinking.

Anybody Knows if this is a problem ...? and if yes then how to solve it...?

Hi Spitfire,

Try This :

1. Switch off your Rx by On off Switch ( If you have one installed externally)
2. Disconnect the battery cord from the reciever (Rx)
3. Turn on your Transmitter (Tx)
4. Put the battery cord back into your Rx
5.Switch on your Rx
6. Now hold the reset button on the side of your Rx with he help of a small pin.
7. Wait for the Rx. to blink red light. Once light blinks keep the pin still pressing the reset button for 5 seconds.
8. Now remove the pin and the Rx light should turn green

Hope this helps...

Thanks Divay. It helped...!

Pleasure is all mine