Main Menu

ER9x problems

Started by Himadri Roy, May 26, 2015, 02:29:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Himadri Roy

May 26, 2015, 02:29:53 PM
I flashed my FlySky Th9x(Mode 2) with the latest ER9X firmware but i encountered a problem
The trim buttons looked reversed(the trim button below elevator and aileron now are causing changes to the Rudder and Throttle and vice versa )
Please help!
Thank you!
:hatsoff:
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

Himadri Roy

#1
May 26, 2015, 03:21:55 PM Last Edit: May 26, 2015, 03:50:10 PM by Himadri Roy
Reflashed the firmware but the problem is still there  :banghead:  :help:
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

akhilzid

Re:
#2
May 26, 2015, 05:18:23 PM
Can you please post the link/ version details of er9x that you flashed.

SK1701

#3
May 26, 2015, 07:17:46 PM
I think there is a feature called CrossTrim which causes this in one of the Radio setting menu. It may be the general menu. I will check and get back to you but see if you can find it and change the setting.

SK1701

#4
May 26, 2015, 07:35:50 PM
OK I just checked my radio. Go to 'Radio Setup' and then the 'Controls' menu and set CrossTrim to OFF.

Himadri Roy

#5
May 26, 2015, 08:22:33 PM
Yeah problem solved Thank you!
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv
Print
Go Up Pages1
User actions