hi all

i finally bought a trunigy 9x transmitter yesterday form rc electro.
how to program it ??

can i use this transmitter as sim

if yes then how

where can i get the sim cable


thanks!

On the sim part, a simple search leads to this :

http://www.rcindia.org/wanted/second-hand-simulator/msg49902/#msg49902

thanks anwar sir 

hello every one

when i was checking the display setting on my new turnigy 9x TX
what i did was 
i first turned on the TX and then went  to menu  and then setting and  went to DISPLAY

AND HERE 

i can see that when i move  the  throttle stick ( left stick ) slowly up
but in the display 
i see the
ELE  moves up and down

and when i move rudder

AIL moves

on the other stick ( right stick )   

when moved left and  right - where as the display shows the RUD  moves left and right

same to the ele  stick moves the throttle

NOTE : THE TX is not yet binded to the Rx ( just checking the display function )

AND NOW  what i mean to say that the left stick is oppreating the function of the right stick and the right stick is oppreating the function of the left stick 


so IS IT A SERIOUS ISSUE 

HOW DO I CORRECT IT 

PLEASE HELP  :h

first congrats getting a turnigy 

check the mode in which you are. I am sure its in heli mode thats why you are seeing all these things moving. these are the movements for cyclic controls .

Second go to the system setting and change the stick mode to mode 2 that will solve all your issues

third there is one famous saying for linux when we come to any doubts and struck some the leads would say =>'RTFM'  . So read the manual first .your tx perfectly fine 

HI ALL

i was going through the programing and i finally got it the right way  




if i face any prob ahead i will fell free to ask  

still thanks all  

thanks  azhaguvel

now the second thing is that  the TX is  making a continues beep sound like
teet ... teet....teet 

now how to solve this sound   
 
what i think is that the  battery voltage is low ( as i am using alkaline battery )

if i am right

how to correct 

yes the tx will make sound if the battery volts is lower then 9 V and shuts down at 8.5 V. change your battery. always use standard batteries. duracell are the best for this.

 forgot to say i didn't get any manual with this !

It does not come with the manual. search in net for flysky 9x or imax 9x manual they are one and the same. you will get one. I am using lipo on my tx

previously i was using this with some diodes soldered

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9787

now I am using this one in my tx.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14076

its awesome fits perfectly in the tx and no more diodes cos it charges maximum to 10.8 V.

here is the manual


http://www.hobbyking.com/hobbyking/store/uploads/380555286X241990X40.doc

another one

http://www.hobbyking.com/hobbyking/store/uploads/50964682X35648X25.doc

another one
http://www.hobbyking.com/hobbyking/store/uploads/529892926X11510X47.pdf
http://www.hobbyking.com/hobbyking/store/uploads/529892926X11510X33.pdf

Has anyone tried burning the custom firmware er9x for turnigy, it requires some soldering in the transmitter too.

foamy builder. Flashing the turnigy 9x is already discussed here.
http://www.rcindia.org/radios-and-receivers/open-source-rc-radio/

but I havent tried one. you need to buy the AVR programming unit first.

thanks every one for help  

i will upgrade it lipo  soon

i have no idea about custom firmware er9x???

have anybody else tried this?

hi all

just charged the battery and checked it
the throttle worked in the ch no 3
but it is reversed means when the stick is up the motor is off
when i bring it down it runs the motor at full speed
 
how to reverse the throttle 

Have you got the manual yet  . Here is a pic from the manual for reverse  .

1. Enter "Menu"
2. Go to "Settings"
3. Go to "Reverse"
You can reverse throttle channle in this menu.

Buddy the manual too big(25 MB) to be sent through mail.
Here Is the direct link

http://www.modelsandall.co.za/products/software/imax9x.pdf

thanks azhaguvel  and majraj 

brought it back to normal
working good 



thanksa lot !