Text only | Text with Images

RC India

RC Equipments => Radios and Receivers => Topic started by: moorthy on December 06, 2013, 08:16:04 PM

Title: FlySky TH9X issue
Post by: moorthy on December 06, 2013, 08:16:04 PM
Dear Friends

Today I noticed when RX connected with battery and if i switch on/off the TX  the motor spin for a seconds and stop(even when throttle stick in 0).But if TX switch off after few second the motor gives beep at that time if i switch on the TX every thing is fine.

Is this a glitch ? Reviews please.
Title: Re: FlySky TH9X issue
Post by: nairitb on December 06, 2013, 10:24:49 PM
Always switch on Tx FIRST. Then connect Rx with battery. Its given in manual of FlySky TH9X in page 3.

To prevent possible damage to your radio gear, turn the power switches on and off in the proper sequence.
Title: Re: FlySky TH9X issue
Post by: moorthy on December 06, 2013, 10:33:01 PM
Nairitb

Thanks a ton.
Title: Re: FlySky TH9X issue
Post by: nairitb on December 06, 2013, 10:36:51 PM
Pleasure  :hatsoff:
Title: Re: FlySky TH9X issue
Post by: moorthy on December 07, 2013, 12:45:41 AM
Saw many forum people had same issues like Failsafe,throttle at 5% approx while binding,Any how learnt lesson SWITCH ON TX FIRST and SWITCH OFF AT LAST.   SAFETY FIRST.
Text only | Text with Images