now i had to connect to the 3rd channel of my reciever okay fine thanks brother...

but wen i connected it to the 1st channel smoke came out from the esc... quickly i had disconnected the batttery...what may be the reason???

There must be some kind of shorting thats why smoke is coming.
Is ur ESC still alive ...?

yes its working....
so can i proceed by connecting esc to the throttlechannel(3rd channel)??

 
 

I am worried about the smoke part. Did you connect it to channel 1 with the connector reversed ? Some receivers absolutely hate that, although the vast majority of good ones will survive such connection reversal.

Also, I am not sure how you determined it is working ? If it is working, what is the pending issue ?

was your motor connected to ESC when u got smoke...?

after that i had cagain connected to the reciever to battery slot and servos to the other channels... they were working but i dint connected to the motor.... i will see by connecting to the 3rd channel tomorrow and see.....
regarding the connectors white wire should come upwards right???

no no at that time motor was not connected....

Balu ,
On the face of the flysky receiver clearly the polarity and the the position of the signal is indicated . You cannot go by right and top etc.

BTW should you want any help it would be a good idea to let people know your receiver model number.

Check out the enclosed PDF.

The ESC Could have smoked only if the polarity between the ESC and the Battery was wrong . There is no other reason for ESC Smoking.

Sai

Quote from: spitfire on November 14, 2010, 12:30:40 AM
You should connect esc to throttle channel..provided it has inbuilt BEC.

Irrespective of the ESC having a BEC or not the ESC is always connected to the throttle Channel.
In the case of an ESC with Opto BEC ( external BEC)  the BEC is connected to the Battery Channel.

Sai

SIR
WHEN I HAD CONNECTED MY FLYSKY TRANSMITTER TO THE 2.4GHZ...TRANSMITTER IS BEEPING CONTINOUSLY...WHAT MAY BE THE REASON... IF I HAD DISCONNECTED THE 2.4GHZ STICK BEPING IS OFFED....
PLS TELL ME WHY..

Balu ,
I cannot understand what you mean by connected your transmitter  so I assume you mean switched on or turned on.
I  presume from my experience that  you are talking about the switch error message  but have not mentioned the message flashing on the screen when the beeping happens . Check this video out. It is a safety feature to avoid problems especially with helis :

http://www.youtube.com/watch?v=GhwOWtcagnA&feature=related

I cannot also understand what you mean by 2.4 G stick  do you mean the module of antenna .

SO PLEASE  PROVIDE CORRECT AND FULL INFORMATION IF YOU WANT HELP.

Rgds
Sai

Thank you Azhaguvel for finding this :

http://www.rcindia.org/electric-power/connection-wiring-diagram-for-electric-powered-setup/

It is very useful, so I split it into its own topic.

i donno what happened my 1500kv brushless motor stopped working suddenly...
my plane weight is 1200gms... can i use the 3500kv motor  and 40amps esc with the 9x6 propeller???
help me,..... battery is lipoly 11.1v and 2650mah.....

this is my motor.... im giving the link sir...
http://www.topfreebiz.com/product/1627006/Brushless-Motor-30a-Esc-Speed-Controller-T-Rex-450-RC-Helicopter.htm

pls check it and guide me...

Answered here (where the question was duplicated) : http://www.rcindia.org/beginners-zone/propeller-size/

In short, the motor and ESC will work together, but the prop needs to be smaller.  And depending on the type of plane, that may or may not be acceptable.

Im sorry sir, wouldn't repeat it again.

Sir 5x4 propeller... Here 5 is length and what is the 4 here

The answer is here :  http://www.rcindia.org/rc-general-topics/propeller-what-do-we-understand/ 

PS: I converted your posts to use lowercase letters.  Please see [4] at http://www.rcindia.org/rc-india-forum/forum-usage-tips/

Quote from: balasubrahmanyam on November 17, 2010, 02:09:03 AM
Sir 5x4 propeller... Here 5 is length and what is the 4 here

hi see this video it will help you understand propeller better

http://www.youtube.com/watch?v=dPOG8PM6nMM&feature=player_embedded

Cheers

Never having cared about propellers,this video taught me a lot.good video.

thank you human   

there are couple of more videos by these guys they are also good and very helpful 

http://www.youtube.com/watch?v=3MLNWqXGPE0&feature=related 

http://www.youtube.com/watch?v=EYkd6c6Gqyg&feature=related 

http://www.youtube.com/watch?v=pjDq7vAWHRA&feature=related    



Cheers
Happy flying

Does anyone know where this radio can be bought without the module and receiver? I had it at one time, and lost it!
Thanks!
Mike

Buy it second-hand, and sell back the module + receiver ?

Interesting Yahoo group
http://groups.yahoo.com/group/Flysky_RC_radio/

Anwar ,
I posted a thread for this link you can delet that  as this is more relevant here