Guys please give a solution to my problem
I am a begineer and i have bought Flysky 4ch Tx and 6ch Rx .I have read the manual provided but it does not turn out to be helpful.I have got 3 cables with it also and i do not know which should be connected to which please help me.Also help about the batteries of this system.
Thanks.
Ask from your supplier first if he can give direction.
Probably one cable is a Simulator cable.
The second one is a USB programmer cable if your radio is programmable.
Batteries you can use the regular 1.5v*8 ..
hope this might help ..
Bhavesh
(//)@bhaveshsangani I have got three cables with this 1 st is a usb cable that has got another end like a 3.5 mm audio jack!Got two other cables please tell me whats the function of all the 3 cables.
Thanks.
The cable with the USB goes into the USB port on the computer.
The other end goes into the radio. If the radio does not have a 3.5mm audio jack use one of the other two cables along with the USB cable. So one end will connect to the 3.5mm jack on the first cable and other end connects to the radio. They are adapters so that this cable set can be used with many radios with different ports. :)
Hope this helps.
Comp-USB<- USB---------3.5mmJACK <-> 3.5mmJACK----------------------ProperCONNECTOR ->RADIO
COMP first cable one of the other cables Radio
Is that proper connector already in the product.I saw there is one connector into which the 3.5 mm goes but its slightly loose so it comes out easily.But it fits into other end of radio easily.Please Tell.Thanks.
You are on the right track. If the 3.5mm conector works you can use it if not you may need another cable. Try using simulator to check if it works.
adyon , plz let me know , from where u get it and how much , i am also intrested.