RC India

Hi All,

Got a new FlySky RC helicopter from RC Bazaar. unfortunately I broke the USB Transmitter and it's not getting detected. (It was getting detected earlier). Any idea of where can I get a replacement of the USB transmitter.

Thanks,
Boomessh V

You are flying a RC heli using a "USB transmitter" ?  Can you post a link to the product you bought ?

Hi All,
I have a 6 channel Model FS-CT6B transmitter. I have installed th eUSB driver. But I dont have a software to caliberate my transmitter.
I tried digital radio. But that is not a full version.
I tried T6config software but it is not working in Windows 7.
Can anyone guide me to get a free software that can be installed in Windows7.

Hi All,

Got an FS CT6B model RC helicopter. I have installed the driver for the serial port. I have Windows 7 and T6config is not getting installed in this OS. Any updated version of T6 Config available for download for Windows 7.

(FS product is similar to this link, expect the link shows of Hobbyking
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9042&aff=561250 (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9042&aff=561250))

Kindly Help.


Thanks,
Boomessh V

Merged.

You posted this once earlier, but did not bother to respond to questions asked.  Do you expect people to help you just because you are starting another topic ?

Hi,
I started this thread, since I was unable to find my original post. Would try to be prompt in reponding
Thanks,
Boomessh V

A quick search brings up related threads :

http://www.rcindia.org/radios-and-receivers/fms-cable-and-flysky-simulator/msg107072/#msg107072 (http://www.rcindia.org/radios-and-receivers/fms-cable-and-flysky-simulator/msg107072/#msg107072)

External :

https://www.hobbyking.com/hobbyking/forum/forum_posts.asp?TID=5865 (https://www.hobbyking.com/hobbyking/forum/forum_posts.asp?TID=5865)

http://www.mycoolheli.com/t6config.html (http://www.mycoolheli.com/t6config.html)

Hope that helps. Please report back either way, as many others seems to be looking for this information.

Hi,

Checked with the link provided, but with out any success. the t6 config is not getting installed in windows 7.
I also see a lot of configuration parameters that are being set while using t6config.exe from this video
http://www.youtube.com/watch?v=YaFeqPcZmfk# (http://www.youtube.com/watch?v=YaFeqPcZmfk#) (part 1 and part2)

If I am unable to install t6config, how will set with the same settings using the DigitalRadio software?

Thanks,
Boomessh V

i try to install t6b sim. but unable to do it. i install vjoy and t6sim. but finally appear as below pic.

CT6B, windows 8 my system

Can someone help him out ?  I don't have these items to test things.

He has been building RC planes for two years and built may be 20 crafts, but never was able to fly them due to lack of flight training. He finally got in touch with us last week. I test flew his twin ducted fan foam F-22, and he was almost in tears to see his creation fly after all this time.

BTW, I hope you have been through this page :

http://www.mycoolheli.com/t6config.html (http://www.mycoolheli.com/t6config.html)

Dear Sir,
the link which you provide to us for Windows 7, if you can help me to get t6sim config for w8

When you install t6 config in Windows 7 and it fails, kinldy go to the compatibility mode (Right Click Properties and choose Compatability) and tick the check box "Run this program in Compatibility Mode for" to choose the different os and service pack categories.

Even in win 8, just check this compatibility option which might work for you...

Thanks

Dear Sir,

I can installed Vjoy perfectly no problem on that (administrator mode) . but when i'm installing T6Sim getting problem. it show the smile  Icon in the download folder and double click type it shows "this programme running ). i can not  reach to configure mode as attached pic ( i can not reach to this configure display).

Note - my system w8

Have you tried setting the compatibility mode for T6Sim as suggested above ?

If you search for "windows 8" in the page below, you will see some similar pointers.

https://www.hobbyking.com/UNITEDHOBBIES/store/product_discussion.asp?idproduct=9043 (https://www.hobbyking.com/UNITEDHOBBIES/store/product_discussion.asp?idproduct=9043)

finally done - i used this link for w8 

http://eaesp.tuars.com/fs-ct6b-configurar-para-simulador-pc/ (http://eaesp.tuars.com/fs-ct6b-configurar-para-simulador-pc/)

Thank you sir

Dear Sir,

normally the signal transmit from -   CT6B - Tsim Receiver - Vjoy demo - Game bad

now i can installed CT6B and Tsim, but i'm unable to configure Vjoy for windows. if some know about vjoy and w8 please advice me.

thanks

after wasting more than 30 hours to install Tsim, Pjoy, FMC, Pjoy config, game pade control, i decided to purchase one rc flight simulator.

can any one refer me to purchase low cost RC simulater in Qatar or net.

Let us talk.

i think this link solves the problem to config t6 radio digital radio software works in windows 7
http://www.sgr.info/usbradio/download.htm (http://www.sgr.info/usbradio/download.htm)

I have d digital radio ...its work perfect in windows 7....I can change my entire settngs of ma radio using dis....but I cant open t6sim I have also the same probs with mnazaneer.....is der any substitute for t6sim ....thank uu

i also have same radio but how can we config with window 7 plz help

Hi,

Just some heads up, the page was moved to:

http://dronepasoapaso.blogspot.ie/2015/03/fs-ct6b-configurar-para-simulador-pc.html

The video is also available in English in youtube  ;)

Sorry  I did not spell the link correctly..  :banghead: :banghead:

The actual webpage is:

http://dronpasoapaso.blogspot.ie/2015/03/control-remoto-fs-ct6b.html