Tx Battery for Futaba and JR

Started by rcforall, June 05, 2009, 04:46:29 PM

Previous topic - Next topic

0 Members and 16 Guests are viewing this topic.

rcforall

Hi ,
We have  received the LIPO batteries 3S 2200 mah for  Futaba and JR Tx.

These batteries  fit very well into the Tx .

Sorry some of them got sold out before this post

So what I have left is  3 nos  suitable for JR and 1 no. suitable for Futaba .

Price Rs 1300 + courier Rs 75 to any where in India .

Rgds
Sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

anwar

#1
In case anyone is wondering, using lipos as TX batteries is very common these days.  The manufacturers seem to take objection to this, and sometimes claim that this voids warranties, but their own specs validate the use of appropriate lipos (as the range of accepted voltage/current falls well within the manufacturer specs).

I have been using TX lipos for a while now with great success.  I like the fact that I can fly for almost a month on a single charge.  Just remember that you should not discharge the lipos too much.  For example, a fully charged 3s lipo would be 12.6v to start with when used in most Futaba/Spektrum/JR transmitters, and one should charge them again when the voltage falls to around 10v.  Do not wait for the transmitter low voltage warning beeps to come on, which happens at much lower voltage.
Hangar : Please see my introduction.
RC India forum and me : About this forum.

rcforall

I agree  Anwar but I normally dont wait till 10 V I normally recharge the Tx Lipo's in any case around the 3rd week.

sai
www.zuppa.io : vehicle telematics, ADAS, IoT , Drones

gurpreetubhi.93

can i have one my no is 8198814418 please whatsapp me