Print Page - help! me with flysky th-9x new

Title: help! me with flysky th-9x new
Post by: pratap on December 14, 2013, 01:41:29 PM

today i recieved the tx from quadcopters
in menu> function settings> display when ever i move the throttle and rudder stick no movement in the bargraph
ail and ele are good
is this the problem of transmitter or anything
please help me i'm a newbie to this hobby and this is my first transmitter
:( :( :(
(//)

Title: Re: help! me with flysky th-9x new
Post by: praveen on December 14, 2013, 02:25:36 PM

Problems may be
1) Bad firmware.
2) Bad Pot inside.
3) detached wire connection between pot and board.
did you check using Rx connecting to servo?

Title: Re: help! me with flysky th-9x new
Post by: Harsh17 on December 14, 2013, 02:29:39 PM

Well as praveen said there can be any of the above 3 problems
I think you should contact your seller ASAP and don't try to repair it on your own

Title: Re: help! me with flysky th-9x new
Post by: kenistan on December 14, 2013, 02:36:26 PM

Try flashing the radio with ER9x firmware or ship it back to quadcopters.Flashing the firmware might solve the issue but it may void the warranty .

Title: Re: help! me with flysky th-9x new
Post by: pratap on December 14, 2013, 02:42:01 PM

:hatsoff:@prveen,harsh17 for your input
no i dont,actually i dint have any servos with me rightnow

Title: Re: help! me with flysky th-9x new
Post by: pratap on December 14, 2013, 02:44:12 PM

i did stick calibration also http://www.hacksmods.com/2012/08/flysky-fs-th9x-turnigy-9x-stick-calibration-howto/
no luck >:(

RC India

RC Equipments => Radios and Receivers => Topic started by: pratap on December 14, 2013, 01:41:29 PM