Okay sir will try my best.
It shall take a while.

Now the flaperon mixing is fully functional.
Will make a model with flaperon mixing.

@Tanmay.mathur
Great work sir may do with my own
Well I don't like the rx v2
Rz6 v2 has ppm but on bat. Port
So if any of us is using onto esc (multicoptor) we cannot power the Fc through tx

Why not you can use femal header jumper cords.
Currently using the rx as wireless simulator dongle.
Gives me 300 metre+ range. :-p

Quote from: Ahmad Ilyas on March 19, 2016, 10:52:02 PM
@Tanmay.mathur
Great work sir may do with my own
Well I don't like the rx v2
Rz6 v2 has ppm but on bat. Port
So if any of us is using onto esc (multicoptor) we cannot power the Fc through tx

i think you mean the rx.

The flaperon mixing is not working . My aim for the mod . Totaly sad . Disappointed. When i flap down the flap just deflect 1 or1.5 degrees. What to do ?

When you are at 1-6 mixing:
Press exit and increase the positive/negative percentage according to your needs

Whatever i do nothing throw increment.
Totally disappointed

All this in 2 pos switch mode . I cant expect to work it in variable mode

Can u provide this hack for long range

Not possible without  antennae swaps or module change,
A less better ways in enLinked below


https://m.ebay.com/itm/2W-WiFi-Wireless-WLAN-Signal-Booster-Amplifier-Antenna-2-4GHz-2000mW-802-11b-g-/152950791209

u can also try this one is much low profile
https://www.aliexpress.com/item/FPV-2-4G-Radio-Signal-Amplifier-Signal-Booster-for-RC-Quadcopter-Multicopter-Drone-For-2-4G/32833734556.html?spm=a2g0s.13010208.99999999.273.hd9Kft

and what about modding it to 7 channel did u get any success

Hey can anyone upload firmware for rcb6i i will try to mod it to 8 channel