HITEC Aurora 9 with FRSKY DHT-U

Started by paladugu_sujith, June 14, 2012, 02:58:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

paladugu_sujith

hello guys

i finally managed to get the 2.4 radio system from frsky. the DHT-U telemetry unit.

Hitec Aurora 9 is the best transmitter system I had used ,  but does not feature PPM Sum . PPM sum feature is possible now with FrSky DHT-U.  FrSky DHT-U is firmware upgradable two way transmitter module can be clamped to the transmitter handle/antenna.  All-in-one combination of telemetry capable, in-built display and alarm threshold settings  featured.



This transmitter module can be usable with

Hitec,
Futaba,
JR/Spectrum
T9x.

Compatible Receivers with DHT-U transmitter module

Mode of DHT-U (Selectable on module menu)   Compatible Receivers
V8 _Mode   Non-telemetry receivers (V8FR-HV, V8R7-HV, V8R7-SP, V8R4)
D_Mode   Telemetry receivers (D8R, D8RSP, D6FR, D4FR)


My choice is  D8fR 2  receiver. Because

RSSI (PWM) and CPPM (8 channel)  output ,
Lighter weight and physically smaller,
Fail Safe
telemetry capable

some pictures are attached and PIN diagrams.


paladugu_sujith

#1
pics

for other radios connection diagrams for pics ..follow this link

http://www.frsky-rc.com/uploadfile/201201/20120103190156120.pdf

paladugu_sujith

#2
Done some changes now.. Aurora 9 with dht .
Need to create a new female connector on pcb and now it works flawless..

praveen

Nice but some messy work ! i did it for my module about 2 months ago! but buzzer was damaged ! so any how i dont use it for FPV flying,so thinking to add when required!
Works good! cheap receivers with telemetry!
To increase thrust you need more  money! But to reduce weight you  need nothing!

paladugu_sujith

i lost my buzzer too.. replaced it with lipo alarm buzzer ,.. works flawless.

praveen

if it was only soldered we could have removed easily ! but its glued to PCB that's the problem. :)
To increase thrust you need more  money! But to reduce weight you  need nothing!