Hello guyz..
i have bought my first Rc Plane Skysurfer v3..along with Flysky FS-T6.
I have heard we can learn using REALFLIGHT stimulator .
what is it i dont have any idea plz help me guyz..give me step by step information as how can i install and connect Tx to Pc 

You have to buy a simulator cable for that purpose.

from where ?? and how does it looks ?
and how to install it once i get that cable ?

You get software along with simulator.
You can get it from any LHS, or if you can wait for importing, get from ebay.com - dirt cheap

You can buy it from hobbysea.com.once you brought the cable download t6config software for programming tx.don't know whether real flight simulator need a dongle but phoenix rc need dongle to use your tx.can get cheap simulator Kit with cd from rs600~900. Or you can get 9 in 1 wireless simulator dongle with cd from hobbysea.com for rs 1550.if you don't want to spend money then go for FMS.for your tx to work with fms you have to download two software ppjoy and t6 sim.jut check the link given below and download the Ms word file which contains step by step procedure.
http://www.2shared.com/document/zTCg-rBF/How_to_use_the_T6A_as_a_traine.html
Don't forget to check YouTube videos about programming flysky t6 with t6config software.

Hi, i have a simulator cable will it work for me to update the Firmware?
Also i am not able to program my FS-T6 as the Menu button is not working properly, can i program the same on my PC?

If your problem is the menu button not working properly. you can replace the menu switch.
you can't update radio f/w through simulator cable.

Thanks Sooraj,
The Menu button is working fine for SYSTEM SETUP but it is not working for FUNCTION SETUP, so i tot the Firmware update might help.

you have two buttons to click  on any menu option - the menu button itself or the ok button, you sa both are not working to enter the functions menu ?

I am talking about the rotate button(left thumb), the 1 sec long press. I am able to select fine in System menu, but when I go into functuon menu say Reverse or End point, when I long press it is not moving, I am able to set value for 1st function by scrolling the rotate button, but I am not able to move to next. For example in Reverse screen, I am able to select for Ch1 for Ch2 the scroll/menu button is not working.

you mean the scroll is not working or the pressing ?

Quote from: santosh911 on December 19, 2014, 01:22:14 PM
when I long press it is not moving , I am able to set value for 1st function by scrolling the rotate button, but I am not able to move to next. For example in Reverse screen, I am able to select for Ch1 for Ch2 the scroll/menu button is not working.

Long press is for selecting a option only, for changing from ch1 to ch2 etc in reverse settings you don't need to push down the menu button for a second

u have to buy flight simulator kit. further it is multiple attachable kit for maximum of transmitter

i have also fs-t6 and i am practing on same

fs-t6 is digital adjustable no u need no programming cable

u can adjust to factory mode and ur simulator software is to be calibrated as per mode 1 or mode 2

one u get flight similator kit ur problems will wipe out

further query contact me

kp

give ur phone i will explain u all

kp

Sooraj - even the short press is not working.
kamal - I am at office now, i will go home and mail you my #.
Thank you very much Sooraj and Kamal.

Hey, are you trying to run a simulator ? for that purpose onl you can use a simulator cable

For updating your radio f/w you need to open your radio and find out the programming pins or if available the programming pads of the microcontroller in there and solder wires to this pads or pins.
Then you need the right programming tool and also the f/w to be flashed.