Print Page - Is it possible to Bind receiver and transmitters of different brand?

Title: Is it possible to Bind receiver and transmitters of different brand?
Post by: rohit_hawks on February 24, 2015, 06:16:07 AM

Hello everyone,
Is it possible to Bind receiver and transmitters of different brand with similar specs: 2.4 GHz FHSS type
I have got couple of Turnigy 6 Ch Receivers, Skyartec 7 Ch receiver from a friend and want to bind it with either Avionic RCB6i or Flysky 6 Ch Txr.
Kindly advice.

Title: Re: Is it possible to Bind receiver and transmitters of different brand?
Post by: pravesh736 on February 24, 2015, 06:56:02 AM

Basically if their modulation is same u can bind it. But different makers have their own modulation. I think u can bind turnigy 6channel Rx to flysky tx. Others am not sure.

Title: Re: Is it possible to Bind receiver and transmitters of different brand?
Post by: rohit_hawks on February 24, 2015, 10:13:46 AM

Thank u Pravesh...where will we find the modulation details of Rx/Tx and how should I bind Flysky 6 Ch TX with Turnigy Rx which doesn't have any bind button? Do i need some PC connectivity to do that?

Title: Re: Is it possible to Bind receiver and transmitters of different brand?
Post by: fxshoppe on April 15, 2015, 02:32:14 PM

please share the model number of tx and rx u have. Also in order to bind usually there is a jumper which connects between first and last pin of 3 pin battery connector and you power the reciever thru a battery connected to any of the free servo ports.

Title: Re: Is it possible to Bind receiver and transmitters of different brand?
Post by: Darshan for multirotors on April 15, 2015, 05:53:52 PM

Which flysky tx are you using?? Cause almost all the flysky txs have a bind button

RC India

RC Equipments => Radios and Receivers => Topic started by: rohit_hawks on February 24, 2015, 06:16:07 AM