Just got the new FPV equipment Fatshark Dominator v3 Goggles

Started by ashishngupta, February 10, 2016, 02:35:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ashishngupta

Just got the Fatshark Dominator V3 FPV Goggles
Fatshark Dominator 5.8GHz Receiver RX Module, Race Bands
Immersion RC 600mw 5.8 GHz A/V Transmitter
Fat Shark 3-Axis RC Trinity Head Tracking Module with Cables
FatShark 700TVL WDR CMOS FPV Camera with Pan/Tilt/Roll

This just to let people know that i have one to show if people want to buy.
kindly note its not for sale! you can buy it yourself...
Pm me if you have any questions
Warm regards,
Ashish

Sukhpreet

F-450 Quadcopter With KK 2.1.5 and FPV capability, FS-CT6B

And remember #FlyLikeAButterflyStingLikeABee

ashishngupta

Hi, all of the above mentioned modules totally costed 52000/-
Warm regards,
Ashish

SI74


nite

TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

ashishngupta

#5
Quote from: SI74 on February 11, 2016, 02:55:46 PM
And you are a beginner!😳😳😳

Well not really.... i used to fly years back... so im back to square one!....just restarting the hobby with new equipment. After all experienced and helpful pilots like you are there to guide amateurs like me, back on track.  :salute:
Warm regards,
Ashish

ashishngupta

#6
Hi Nite,

I currently fixing my FPV system...trying to wrap my head around the best option...keep getting irritated with the wiring  :banghead:through the wing. im contemplating if i should keep the 5.8ghz tansmitter in the body or on the wing.... i read these 600mw heat up so...... I was also thinking getting a 25pin connector of some sort and attaching it to the wing wires...any advice?
here is my proposed setup.  :headscratch:

https://www.dropbox.com/s/gig2fy6z79hlc0u/DSC_0038.JPG?dl=0

https://www.dropbox.com/s/y8v9s3kd97ubajl/DSC_0039.JPG?dl=0

https://www.dropbox.com/s/tv7c794yvgbjze2/DSC_0041.JPG?dl=0

https://www.dropbox.com/s/rho2ekbh4gtpox6/DSC_0042.JPG?dl=0

:hatsoff:
Warm regards,
Ashish

a.p26691

Hello everyone,
         I wanted to sell my fatshark dominator v3 goggle kit. 1> Fatshark dominator v3 fpv goggles
2>Fatshark 5.8ghz 250mw A/V transmitter
3>Fatshark 5.8ghz 5G8RX 32ch race band receiver module for dominator goggles
4> ImmersionRC 5.8Ghz SpiroNET antenna set RHCP ( sma connector)
5>Fatshark pilot hd v2 camers with 720p sd recording
Additonal two cameras free

KIT PRICE Rs. 45000/-
Location Maharshtra. interested person can mail me on . all detail and custom paid bills will be given.

ashbash


a.p26691

I Dont get time to fly now days. thinking to get out of thus hobby. didnt use from long time.