RC Equipments => Radios and Receivers => Topic started by: ashishngupta on February 10, 2016, 02:35:56 PM
Title: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: ashishngupta on February 10, 2016, 02:35:56 PM
Just got the Fatshark Dominator V3 FPV Goggles Fatshark Dominator 5.8GHz Receiver RX Module, Race Bands Immersion RC 600mw 5.8 GHz A/V Transmitter Fat Shark 3-Axis RC Trinity Head Tracking Module with Cables FatShark 700TVL WDR CMOS FPV Camera with Pan/Tilt/Roll
This just to let people know that i have one to show if people want to buy. kindly note its not for sale! you can buy it yourself... Pm me if you have any questions
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: Sukhpreet on February 11, 2016, 12:08:07 AM
How much did it cost u Sir....?
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: ashishngupta on February 11, 2016, 01:17:24 AM
Hi, all of the above mentioned modules totally costed 52000/-
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: SI74 on February 11, 2016, 02:55:46 PM
And you are a beginner!😳😳😳
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: nite on February 11, 2016, 09:17:45 PM
any pics of your system ??
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: ashishngupta on February 12, 2016, 12:35:48 AM
Well not really.... i used to fly years back... so im back to square one!....just restarting the hobby with new equipment. After all experienced and helpful pilots like you are there to guide amateurs like me, back on track. :salute:
Title: Re: Just got the new FPV equipment Fatshark Dominator v3 Goggles
Post by: ashishngupta on February 12, 2016, 12:47:10 AM
Hi Nite,
I currently fixing my FPV system...trying to wrap my head around the best option...keep getting irritated with the wiring :banghead:through the wing. im contemplating if i should keep the 5.8ghz tansmitter in the body or on the wing.... i read these 600mw heat up so...... I was also thinking getting a 25pin connector of some sort and attaching it to the wing wires...any advice? here is my proposed setup. :headscratch: