i wana reset my flysky 6ch  how is it?  plz help me

my flysky ch4  only working what happen? i am confuse now plz any body help me

How do you know that only channel 4 is working ?  Have you connected a *working* servo to other channels and tested by moving the appropriate sticks ?

Hey dont get upset.. try this first.. download the attached file..
connect the transmitter to pc.. open T6config..
select the appropriate port then click open and select the downloaded file...
press open..
you are done..
sorry unable to attach the file here.. send me your mail id.. will send it

there is no way to reset the firmware, even my ct6b has throttle issue and cannot be solved.

i have same problem my throttle not work  too and i m now sad 

my email plz send me default setting file 

check your mail

Dear Palwinder,
You will have a tough time if you are not aware of things and how to do???

if you have connected ESC it may also happen that you have reprogrammed esc so throttle will not work.

have u connected tx to a PC ?? If you havent done that you dont need to reset.

the following steps can help you connect TX to PC.
Remove all installations.
> do not connect anything to computer
> Have t6 Usb drivers installed
> once USB drivers installed connect the cable to USB ( DO NOT CONNECT THE TX)
> See the device manager  ( try changing the port to 3,4) It can be done. There will be issue your Mouse dongle/ photon will be using these ports ... remove them.
> once you get the device on 3,4 port no. 
> Install T6 config & restart system
> check Device manager again
> connect the other end of cable to TX
> switch ON TX ( Batteries should be there in TX)
> run T6, select the same port as in device manager
> check the sticks you should have synch
> Get user & save settings

With this steps i could connect TX to laptop.


if you need any help do call on 8826298725 for instant help/ advice.

saurabh

althou ct6b is pretty cheap and could be a good deal for beginners but i would recommend only for park flyers and heli clones.

yes true...... its a nasty TX. you cant even reverse a servo without a PC....

avesh send me file that work thanks  guys   

Why do you not read what is written ?

Do you have a servo ??

If yes then pls plug the servo into channel 3 and move the stick
Up and down .... does the servo move

if you need config for plane here is the link.

Hello all,
I have flysky FS-CT6B transmitter and I want to do default setting.
So can anyone have default setting file for this transmitter??

Please help me with this!!

Email-

Hey palwindersingh,
I am facing the same problem as you had.
So can you pls send me the default setting file that avesh send to you??

Please help me!!!!

Guys, even my transmitter somehow got into this weird configuration and now only channel 4 is responding
if someone has the default t6 config file, please! send it to me
my email is