You can buy one Voltage Converter, I use MAXCON which Converts 220V to 110V. MAXCON also known as MX, here are the details:

MAXCON Voltage Converter W/Universal Socket.
Manufactured by:
SMILE ELECTRONICS
102, Agarwal Ind. Estate, Estate, S. V. Road,
Dahisar (E), Mumbai - 400068. India

They have two models which are transformer based, please don't by SMPS type Converter for your charger adapter.

Model No: 745, 20 Watts, MRP: Rs. 265/-
Model No: 745 A, 50 Watts, MRP: Rs. 295/-

Hello friends. Please Please help.
I need an advice. I have a charger which I am using for charging my camera battery. Can this charger be used for charging the battery provided with Dx6i tx (Spektrum 1.2v/1500mAh)? This charger is used for charging Sony rechargeable battery (1.2v/2100mAh). I am attaching a picture of the same.

If you can post readable information (via close-up pictures?) on both the charger and the Tx battery (just to be sure), it should be possible to make a fairly safe call on this.

As much as I can see your Charger has 360mA output and it is for NiMh battery. Yes you can charge your DX6i battery with this charger because those batteries are also NiMh but less mA. If your charger has auto cut of features then very good, you will notice that it will takes less time to charge DX6i batteries, but if it has no such auto cut features then you have charge DX6i batteries 1/4 times less than the time you charge your camera batteries, for example if the manual of charger says you should charge your camera battery 4 hrs then for DX6i batteries you should charge 3 hrs only. But I think this kind all good NiMh chargers have auto-cut of system.

excuse me anwar bai, what is this all chemistry battery charger, also i have got a hobby king E4 charger, what kind of power supply should i use with it, sorry if i post it in the wrong thread........ 

Hello friends..finally taking the advice of Rajib, I charged my new rechargeable battery with the Sony charger and it worked..I am just afraid that it does not have any side effects..Thanks Rajib
I will now practice RC flying on simulator with Dx6i tx and then finally move to the field..

warriornair HobbyKing E4 Charger is only for LiPo (Lithium Polymer) battery. For power supply you can use either 12V battery or 13.5V laptop power adaptor but make sure about correct polarity.

I use a separate 4 cell nicad charger which is generally available on all electrical shops

Quote from: warriornair on February 27, 2011, 07:49:30 AM
excuse me anwar bai, what is this all chemistry battery charger, also i have got a hobby king E4 charger, what kind of power supply should i use with it, sorry if i post it in the wrong thread........ 

Something like the Accucel 6, the Imax B6, Thunder AC6 etc. All of these can handle pretty much all type of cell chemistries.

You need a 12v power supply for your E4, see this thread :

http://www.rcindia.org/batteries-and-chargers/hobbyking-e4-blalncer-charger/

thank u anwar and rajib g