problem in 5.8ghz 2000mw very low range

gaurav jain · January 08, 2015, 05:17:24 PM

I have 5.8ghz 2000mw boscam tx and rx 305

I tested with 5dbi circular polar.anteena i got onle 10feet range

Plz help what can i doo plz help

sooraj.palakkad · January 08, 2015, 06:29:54 PM

Which battery packs you used in Transmitter , and Receiver ?

Which channel you used ?

What is happening if you go beyond 10Ft. ?

arun.sreelakam · January 08, 2015, 09:37:22 PM

Did you ever connected the battery without installing the antennas.. if so it may make some range issues sometimes..

gaurav jain · January 08, 2015, 10:41:45 PM

I used 3s 2200mah lipo battery

gaurav jain · January 08, 2015, 10:44:18 PM

I think first time used without anteena connect

So what can i do if i connecter 3s battery to tx with anteena

gaurav jain · January 08, 2015, 10:45:56 PM

All channel cheaked in tx rx one by one but no diffrense in range

sooraj.palakkad · January 08, 2015, 11:37:39 PM

Which battery at receiver, isn't it a 2S ?

And is the antenna connector perfect ?

gaurav jain · January 09, 2015, 05:02:32 AM

same 3s batgtery and antenna connector are also checked all are good as per i seen in youtube video

i think prob is that

when i connect first time without anteena so the power of anteena going from tx is low thats y i range is very low

so plz help how can i repair this

if u know plz reply

and thanxs for ur replys

shadman_alam · January 09, 2015, 06:01:02 AM

You probably have burnt ur tx.. Get a new one.. Cant be repaired.. You should NEVER switch on a tx without antenna.. Thats fundamentals of RF..

There could be a possibility that you are not on the same frequency on rx and tx..

problem in 5.8ghz 2000mw very low range

shadman_alam