Print Page - Receiver blinking red

Title: Receiver blinking red
Post by: johnsonrego on February 23, 2013, 06:44:24 PM

Hello Friends,
Need your help..... :headscratch:

I connected by Rx/Tx & found that the receiver is blinking red. I could not hear any beep during start. What could be the problem & how to fix it?
Receiver: Flysky FSR6B
Transmitter: Flysky FS CT6B

Title: Re: Receiver blinking red
Post by: AEROVISHWA on February 23, 2013, 06:49:51 PM

the prob is u have to bind it... use the search option u will get ur answer...
.

Title: Re: Receiver blinking red
Post by: KALYANPRODHAN on February 23, 2013, 09:01:12 PM

Look,
initially I had made a mistake. The beep comes from the motor and I have not connected it and waits for beep sound from ESC. Again throttle need to be in low position and you have to ensure it. Recalibrate ESC.
But at first bind Tx and Rx.

Title: Re: Receiver blinking red
Post by: johnsonrego on February 24, 2013, 08:27:49 AM

Thanks for the support...
Problem fixed. I had to blind the Rx/Tx.

Title: Re: Receiver blinking red
Post by: KALYANPRODHAN on February 24, 2013, 10:25:35 AM

Don't stab eyes of Rx with knife to make blind. The blinking LED is not eye but indication light. Rather bind with sync. byte in RF communication using bind plug supplied with.

Joking

RC India

RC Equipments => Radios and Receivers => Topic started by: johnsonrego on February 23, 2013, 06:44:24 PM