Hello guys,
         There is a problem with my flysky 6ch transmitter.Iam facing a problem with my pitch stick (correct me if Iam wrong,Iam new to this hobby.).I bought it from Rc Hyderabad.The owner of the shop speaks in hindi and I couldnt speak in hindi.My transmitter arrived in a box without manual, and when I opened the box I noticed that there is problem with one of the two sticks.I reported the same thing to the owner of the shop.Because of my poor hindi, he thought that I broke my transmitter and he said that he wont take it back.So I tried to fix it,but I couldn't.So I bought a new hobbyking transmitter again,but at the same time I couldnt replace flysky transmitter with new hobbyking transmitter.I want it get fixed.Is there any hobby shop or anyone out there who could fix my transmitter?
        Please help me!!!!!!

y u want to fix use hobbyking itself. rx can be used with both.

What?can I use flysky rx for hobbyking?

Yes dear try binding

Hay plz post both transmiter pic.. so we can understand clearly what u have...

Here are the pictures of my two transmitters-

where ?

Sorry there is a problem with my tab .

I will post the pictures soon.

Here are the pictures

What problems are you facing with the pitch stick? Could you be a bit descriptive( stick doesn't respond, its jammed, etc) so that helping you out will be easier

probably a video on the problem

Yes it is jammed,I couldnt move it properly.And the throttle  stick is not responding properly.I connected the reciver to kk2.1.5,and I couldn't see any throttle  output on my screen.

As you have said that the shopkeeper is not willing to take back the Remote can you open up the TX and post some high resolution photos of the sticks from beneath? It would be better if you use some photo hosting sites like photobucket, flickr, etc and embed the link in your post.

You could try connecting servo to each channel and test them.

Most probably gimbal mech of the stick is dislocated from its socket. That happens with CT6B most of the time if we pressed the stick hardly.

Yes I did,but it is not working.