Hi Guys,, Need some help with sim/transmitter setup. I bought the 9 in 1 saili sim with dongle. I used the Phoenix sim. After a long time fighting i disabled the CCPM in transmitter then now the heli is able to take off okey 80%, but as seen in many other simulator its not steady, it goes to right even on howering, when i try the sub trim it goes to other side... not able to balance it. Is it like this or any other setup i should do ? Please help.
which transmitter are you using?
FS-TH9X
Have you calibrated your tx properly? Before calibrating put all of trims/subtrims to zero.
Issue of oscillation of heli seems normal to me. 'making heli stable' is what you learn by learning hovering a heli. Try adding some d/r and expos and practice with properly calbrated tx.
From where you got the 9 in 1 sim?
Quote from: spitfire on March 02, 2012, 12:06:15 PM
Have you calibrated your tx properly? Before calibrating put all of trims/subtrims to zero.
Issue of oscillation of heli seems normal to me. 'making heli stable' is what you learn by learning hovering a heli. Try adding some d/r and expos and practice with properly calbrated tx.
Yes I did exactly the same, started with a new profile in the transmitter... I thought in a basic setup the heli will hover in the same spot unless the eliva/aril is disturbed :)) -> beginer :))
Quote from: raja2k5 on March 02, 2012, 02:50:13 PM
From where you got the 9 in 1 sim?
I got it from ebay
http://www.ebay.com/itm/270873628094?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
was the issue resolved?
The left side drift i guess it would be there always ... so am practicing with that ....
check in setup where they show bars for stick movement
the left side push its going to be there as its the ground effect it seems !!