Hello everyone,

I am new entrant. Looking for TX and RX which would work for both helis and planes. Less than 10 K (6-7k)

THANK YOU.

for helis and planes buy Avionic's 7 channel transmitter available at RCBazaar

or helis and planes buy Avionic's 7 channel transmitter available at RCBazaar

Is it good one? I searched but could not find much reviews. It is costing around 6k. Are not there other option within same range? What about flysky and Turnigy 9X? How much will they cost?

Thanks a lot.

I have one more question. Can't 6 channel be used for helis?

Thanks

Flysky and turnigy are also good but they seem to be out of stock all the time...

Flysky and Turnigy both are good ones. Infact, if want to choose one of it, I'll go with Turnigy 9x. You can search for it on different stores like rcproduct.in, edallhobby, etc. Also, if you can wait for a month then quadkopters.com would restock there flysky radio's. So you can go for that too.

Thanks a lot for the response. Also why  channel 6 radio can not be used for helis?

RCB 6i has gone out of stock again despite of the increased price.

I think finally wait is over . Flyskyis available at Rc Mumbai.com.

Being the beginner should I go for Flysky t6 and flysky 9x

Please suggest. My interest is heli.

Today I have received my first radio FS TH9X

Manual does not seem to have detailed instructions for beginner like me.

May I request to please point me to some links to get started. of course I am searching but if somebody can point me useful link that would be helpful.

Thanks a lot.

Plz give ma a call i will explain everything its very easy to set up

i buy turnigy 9xr. is it good for heli and quadcopter.

Turnigy is a good brand, it should do the beginner Justice.

Just to share what I have learnt so far as a beginner. I was in same confusion and I end up with purchasing FlySky TH 9X.
Reason behind getting flysky and not turnigy is that, 2.4 Ghz module is removable in FS whereas 2.4 Ghz module is hard wired to turnigy Tx, If you are beginner I am sure, you want to learn flying onto simulator first. To use your Tx with simulator, you need to remove 2.4 Ghz module which is not possible in turnigy  whereas FS give you that facility. However it is not completely impossible to remove module from Tx - you will end up with de-soldering antenna cable from module and solder it again to make it removable - You will find lots of videos on Youtube for this 

I think as a beginner you should get FS TH 9X which has same specs as Turnigy. As per my knowledge FlySky is mother company and Turngy just rebranding same Tx) later you can flash ER9X onto FS and modify it with FrSky DJT external module to get Failsafe functionality.

You can get Turnigy in rcproduct.in for about 8k-9k whereas is you contact rcmumbai.com you can get FS TH 9X for about 5k with shipping.

Choice is yours.

you can also remove 2.4GHz module in turnigy 9xr

if you are talking about this

http://www.rcproduct.in/-24ghz-turnigy-india/92-turnigy-9x-9ch-transmitter-w-module-8ch-receiver-mode-2-without-battery.html

No, you cant. Module is hard wired to antenna.

Quote from: niteenk on July 28, 2014, 11:08:29 AM
if you are talking about this

http://www.rcproduct.in/-24ghz-turnigy-india/92-turnigy-9x-9ch-transmitter-w-module-8ch-receiver-mode-2-without-battery.html

No, you cant. Module is hard wired to antenna. You can remove it only once you de-sold antenna cable from module and sold it again - not hard to do though)

but i m talking about this  transmitter turnigy 9xr

http://www.rcproduct.in/combo-offers/8-turnigy-9xr-9ch-transmitter-with-frsky-module-9ch-receiver-mode-2-v2-firmware-combo-offer.html

Sorry Sir, My bad !
I missed 9x'R' from your comment.

The 9XR is a better radio. Module can be changed and has a derivative of er9x firmware. All the mods you will want to do on 9X are already done for you on the 9XR.