Print Page - Throttle delay

Title: Throttle delay - flysky 9th
Post by: niteenk on October 02, 2015, 07:14:11 PM

Hi all

I am facing strange issue with throttle stick on my flysky 9th radio.
Throttle stick starts reaponding after stixk reach to half position

I tried stick calibration multiple times but no luck, still facing same issue.

Any suggestions?

Sorry for posting this before trying to forum for solution

Title: Re:
Post by: docnayeem on October 02, 2015, 08:16:10 PM

Hello
Seems to be a problem with ESC calibration , have you calibrated the ESC ?
Regards

Title: Re:
Post by: niteenk on October 02, 2015, 10:20:46 PM

Yes sir. Calibrated multiple times.
On transmitter display menu i can see valuea go +ve after stick go half way through for throttle

Title: Re: Throttle delay - flysky 9th
Post by: akhilzid on October 03, 2015, 12:58:57 AM

try radio calibration too.

Title: Re:
Post by: niteenk on October 03, 2015, 08:02:50 AM

I tried radio calibration mutipletimes but same issue.
I am calibrating escs from kk board is that correct or should i try esc calibration individually connecting it to rx throttle channel?

Title: Re: Throttle delay - flysky 9th
Post by: prabal276 on October 03, 2015, 09:20:11 AM

check your channel 3 trims.
rcb 6i had a similar problem but i noticed the trims were not right.
after correction, it was smooth

Title: Re:
Post by: niteenk on October 03, 2015, 12:03:39 PM

Thank you all for help.
I reconnect everything and then calibrated radio and escs again and set right trim. Everything works as expected now.
Thanks again.

Title: Re: Throttle delay - flysky 9th
Post by: prabal276 on October 03, 2015, 01:57:28 PM

you are welcome :)

RC India

RC Equipments => Radios and Receivers => Topic started by: niteenk on October 02, 2015, 07:14:11 PM