Hello everyone,
I was building a scale Cessna 182 .90 size, and was working on putting the landing lights. Now i would like to have these lights work through a transmitter channel. Does anyone know how to build a "switch" that could be mapped to a RX channel, and be used ?
I am sure there would be schematics available, would appreciate if you could point me to one such site, OR if there is a ready made product, just link me to it.

Thanks !
Gaurav

You can get something like http://hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8850  and wire it up to any spare channel on your RX. 

Depending on the capabilities of your radio, you may be able to assign the lights to whatever switch you want (with a bit of programming on the radio).

Hi, I am in process of developing one strobe lights with
   2 red Beacon (Flashing)
   2 White Strobe (Flashing)
   1 Red navigation light  (ON)
   1 Green navigation light (ON)
   A set of two White LED for landing light. (ON)
As soon as this PIC based project is completed, will post all details here.

Sandeep

i have recntly bought anderson strobe light running on 4.8 V battery can any one tell me that how are thy quality wise and for how long they can last on one full battery charge and is ther any problem if i switch them ON for any number of hours and what is the life of the STROBE LIGHT.

Read this ..... this is my humble attempt at designing an RC switch. U can control any electronics device with ur RC channel. Its made on a controller so u can actually program strobe lights and flasher into it very simply.

http://www.rcindia.org/self-designed-diy-and-college-projects/rc-electronic-switch-for-switching-on-lights-and-other-accessories/msg125968/#msg125968