Want to upgrade my RADIO SYSTEM

Started by nite, November 04, 2015, 12:09:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nite

Hiii everyone i m into RC (250mm racing quads) for last year. i Have a flysky fs-t6 and it work fine for me but now i want to upgrade for a serious RADIO system like FUTUBA OR SPEKTRUM soo please now really need help for up-gradation and don't know much about radios like what is module  :headscratch: :headscratch: ? and want a 6 channel please help  :hatsoff:  and yup last budget is around 15k ..
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

ved

Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|

nite

which model bro.. and from where i can buy this ??
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

nite

i have selected two things first one is Radio which is TURNIGY 9XR PRO and sec/ond one is FrSky DJT 2.4ghz combo  soo now can i buy both of these. they will be compatible with each other or not  ??
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

sooraj.palakkad

They are compatible.
You can go for that combo with out hesitation.

PS. I have turnigy 9xr pro for sale.
RC Hobbyist and an Aerial Cinematographer..

SK1701

The Taranis is probably the best choice. Unlike the 9XR or 9XR Pro you don't need to any mods or use any external cables to get telemetry. It comes with an internal XJT module, allowing you to use the new X-series receivers and you can use another module as well. The build quality is supposed to be better as well.

romanxdsouza


nite

thanks for the info to all bro .. in noon i was really going to buy the turnigy x9r pro and DJT module but now i m thinking for taranis because in real i dont want to messup with my radio like going to flash or any mod and i think X9r pro is for those... i m plug and play type soo  want an sleek and comfortable user experience. soo now going to buy that taranis but now the question is from where ?? locally prefered from india from any reputed seller
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

Himadri Roy

For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

SK1701

Well the Taranis is also supposed to have quite a bit of a learning curve. It is really powerful but you have to be willing to adjust a lot of settings, update firmware from your computer etc. From what I have heard, it is definitely not a plug and play solution.

nite

@himadri - bro they didnt have in stock rite now ..

@sk1701 - then bro what should i go for ??? ?? i think x9r pro and djt will be good because i m gonna use it very simply and its in my budget too. can i bind dsm2 or dsmX rx with frsky djt module ????
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

Himadri Roy

Currently i think they are the only two places in India selling taranis. And you cannot bind dsmx or dsm2 with djt module. They are 2 different systems!
For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

pravesh736

9xr , taranis have similar firmware, both have same learning curve, but to get started off, u don't need to learn anything much in both txs for 250 multis , as all setting can be done in flight controller. Taranis > 9xr

nite

OK and what about spares availability of both  in India ?   and moving forward to x9r pro with djt because taranis doesnt have in stock right now neither in rcm nor in rcproduct.in
TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

cyberhack

Bro get a flysky 9ch tx RX Rcmumbai also stocks their RX if u need and RX of this tx is avalaible easily also mods are avavailable if u want to make ur tx more functional such as backlight then installing er9x or other open source firmware also the stock firmware is good for beginners in 9ch tx dnt knw abt taranis BT flysky 9ch is Surely a good tx also if you have a flysky 6ch tx with u u can use it's RX with this tx and may be you can also use trainer mode (not sure abt trainer mode ) my suggestion go with flysky 9ch tx +Djt module it will give u range of 1.5km or so ... All the best

shobhit17

Dear Friend... If you are looking to spend something around Rs 15,000.... then the best bet is a FUTABA T6J or T6K Tr and Rx OR the Hitec Optic 6.  Both especially the Hitec one have excellent reputation and are fully programmable with some telemetry.  You may check the details on the Net.  I am buying one from the Sharma Models shortly as am planned to be in Jodhpur this month end.  You may also liik into these sets as they cost just a shade over 15 grand.

I too am using a FlySky FS t6 and am upgrading.  Thereafter will be selling off my FlySky FS T6 in Dec this year.  Have used it for just over a year.

Best Wishes
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

lijochrn

For higher end radios  FUTABA/SANWA[Airotonics]/HITECH/KPROP .
Always Slide iT...

shobhit17

Well yes.... I purchased a HITEC Aurora 9 recently but it did not work after the first charge.  i.e. withing 2 days of receiving the set.  I have returned it to the seller as per his instructions and for the past week he has been trying to check what is wrong with the set..... as of now he has promised to refund my money... waiting for the refund and someone to sell me a good set.
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

sanjayrai55

I'm selling my Hitec Optic 6, as I just got a new Taranis X9D+

Look out for the sale thread after a week or so

nite

TBS DISCOVERY, QUANUM VENTURE, EACHINE Q90
ALIEN 6", ZMR250, ROBOCAT 270, QAV280, FLEXYBEE 280,
TURNIGY 9XR Pro, XJT MODULE, FATSHARK HD2, FATSHARK TELEPOTER, FLYSKY FS-T6, TURNIGY 5X,
WLTOYS V686G, TARANTULA X6, SYMA X5C, SYMA X11, EACHINE CG023, EACHINE H8, WLTOYS V911 HELI, HUBSAN X4L

shobhit17

Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

sanjayrai55


shobhit17

Thanks a lot for accepting my request on the Hitec Optic 6.  Will be looking forward to having it soon.
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...

softlink

I have a spectrum dx6i dsm2 with ar6200 full range receiver. If interested do let me know

shobhit17

Already got my set... just waiting for it to reach me anytime next week... Thanks a lot softlink.
guess this thread may be closed.
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...