Text only | Text with Images

RC India

RC Equipments => Radios and Receivers => Topic started by: mai on February 05, 2012, 10:19:37 PM

Title: xbee question
Post by: mai on February 05, 2012, 10:19:37 PM
hey guys,

i have a question about the xbee modules,  How can we connect it to the computer (the one that acts as a transmitter). Use  xbee + xbee Shield + Arduino or just xbee + USB adaptor?
and in either case the PC will act as the controller, right?

thanks in advance
Title: Re: xbee question
Post by: RotorZone on February 08, 2012, 08:07:05 PM
Just xbee + USB adaptor is enough for PC to communicate to Xbee.
Title: Re: xbee question
Post by: anwar on April 07, 2012, 08:17:48 AM
http://diydrones.com/profiles/blogs/announcing-the-3dr-radio-telemetry-system
Title: Re: xbee question
Post by: Swapnil on April 07, 2012, 08:45:18 AM
Wow, these are good and affordable!
Title: Re: xbee question
Post by: sumeet_sic on April 11, 2012, 01:16:28 PM
Are you looking for these:-

Xbee USB adaptor
http://shop.sumeetinstruments.com/index.php?route=product/product&path=41&product_id=124

Xbee products
http://shop.sumeetinstruments.com/index.php?route=product/category&path=41

Yes, no micro-controller is required for the USB board. you can communicate and set properties of the xbee module using the X-CTU software. On the arduino/other microcontroller you may use the SIP adaptor or Xbee adaptor on breadboard or prototype board.
Text only | Text with Images