Make your own 450 frame quadcopter at VerveTronix!! Highly recommended for beginners and enthusiastic learners!!!
Following topics will be covered:

1. Basic fundamentals of Quadcopter.
1. Guidelines on the assembly of 450 frame.
2. Soldering Power Board.
3. Assembling all the required components.
4. Esc's calibration.
5. Overview of KK 2.1.5 flight controller board
6. CT6B transmitter binding with receiver
7. Wiring ESC's
8. Motors and propellers orientation concept.
9. Understanding Aileron, Elevator, Throttle and Yaw.
10. Assembling the quad.

Please note: THIS IS NOT A TOY QUADCOPTER ASSEMBLING WORKSHOP!
Get real hands on experience of soldering the components, wiring entire quadcopter, understanding basic RC transmitter functions, calibrating ESC's, understanding LIPO batteries connection etc.

During the workshop 2/3 participants will work on one kit (depending upon the participants experience on soldering work etc)
Even if you are unexperienced in soldering or with any electronics components we will be happy to help you understand the basic fundaments of the same and help you build your quadcopter.

Entire Kit along with the necessary tools needed to assemble the Quadcopter will be provided by us. Participants will have an option of buying the Quadcopter after the session by paying extra charges as applicable or return the kit to us.

Charges for the workshop are 2000/rs only. For this session we have only 6 Seats available so kindly reserve your seats in advance. Details of payment will be provided once we receive your confirmation on or on the contact no 9820884523.

Feel free to share this event with your friends who you think will be interested or who share the same Verve (enthusiasm) like us!!

Venue: 309 Mahavir Industrial Estate, Near Khawish Hotel, Kachpadda Malad West. Mumbai 400064
Date : 11th December 2016
Time : 11 AM to 4 PM