Hiiii Guys..
This is Nishit Doshi ..I am student of K.J.Somaiya Institue of Engg & IT. Sion, Mumbai.
we have our Technical Festival name RENAISSANCE '10   on   30th september and 1st october in mumbai ,sion. we organizing a competition RC CAR RACE on 30th september & 1st october from 11 am to 4 pm for 2 days in our college K.J.Somaiya Institue of Engg & IT (KJSIEIT) and the wining participant will be Rewarded with amount of 20000 INR..       ALL THE RC CAR LOVERS R INVITED..  SO HURRY UP.



contact details-

Nishit Doshi
8080987626


to get urself register


Contact
K J Somaiya Institute of Engineering and Information Technology,
Somaiya Auryvihar Complex, Eastern Express Highway, Sion (East), Mumbai - 400 022





Registration   Fees

COLLEGE  STUDENTS  = 125 PER HEAD

OUTSIDERS = 150 PER HEAD



Specifications

Machine Specifications

1.   Machine should fit in a box of dimensions 800 mm x 600 mm x 600 mm (l x b x h) at any moment of time during the race. The external device which is used to control the machine is not included in the size constraint.

2.   The machine should be controlled by a wireless remote control mechanism throughout the race.

3.   The machine must not be made from Lego parts, or any ready-made assembly kits other than the parts mentioned below. Readily available chassis layouts are not allowed. Any machine found having a ready-made chassis will be disqualified.

4.   The machine may be roughly classified into structural and functional parts:
Functional parts - Gears, differential gear, engine, springs, shock absorbers, servo motors (non-propulsion purposes only), batteries, wheels, wheel hub are allowed to be used as available in the market.
Structural parts - Chassis, steering mechanism, shock towers and suspension (excluding upper suspension arm, suspension spring and shock absorbers) have to be built by the participants themselves.
Judging for the same will be strict and the participant will be immediately disqualified if any of the above structural components are found to be ready-made.

5.   The tires used must have a minimum diameter of 3 inches. You are advised to use tyres of good width for better performance on dirt tracks.

6.   Brake Mechanism: It is compulsory to incorporate braking mechanism in the car. Participants have to fabricate the brake pad as a part of the braking mechanism. Any other part used in braking mechanism (including the brake disk) can be ready-made.

7.   Wheel Hub: Any part rigidly attached to the wheel hub will be considered as a part of it and hence can be ready-made. An example here is that of the ball stud.

8.   Steering Mechanism: Any part which is connected to steering rod rigidly i.e. has no degrees of freedom with respect to steering rod (example: heim joint) will be considered as part of steering rod and thus has to be fabricated by participants.



Propulsion & Steering


1.   The machine must use only mechanical power generated by an internal combustion (IC) engine for propulsion. Only one IC engine should be used in the machine. Use of any other sources such as chemicals, compressed gas, rockets etc. is not allowed.

2.   Any machine which uses DC Motors for propulsion will be disqualified. However DC motors and servos can be used for steering mechanisms or any other control mechanisms apart from propulsion.

3.   The machine must have an on-board power supply to run any mechanism requiring electric power.

4.   The maximum allowed capacity of IC engine to be used is 4.6 cc (i.e. Participants can also use 2.5 cc, 3 cc, 3.5 cc or any other IC engine lower in capacity).

5.   The electric voltage anywhere in the machine should not exceed 12V at any point of time.

6.   There shall be a countdown preceding the start of the race. No participant is allowed to touch the machine during the countdown period.

7.   Providing a clutch mechanism between the engine and the wheel would prove useful, as it would prevent the engine from dying out at any stage of the race.

8.   Participants are advised to use a proper cooling mechanism to prevent overheating of the engine

9.   Participants are advised to use sway bars for better control and stability.

10.   The participants are advised to use proper air filters as dirt might cause seriou
s problems to the engine.

11.   Readymade wheels are allowed.

12.   The machine will be inspected and if found to be dangerous, the team will be disqualified. This decision rests solely with the judges and the organizers.


RULES

Game Rules

1.   There will be a qualifying session with each team getting 2 laps out of which the faster lap will be considered. Note that these laps will have to be taken successively.

2.   The top teams from the qualifying rounds will make it to the second round.

3.   After the qualifying round there will be races with multiple cars racing at a time. So the participants must use remote with frequency of band spectrum 2.4 GHz.

4.   The track will have check points at regular intervals. If a machine tumbles, or halts, or goes off the arena at any point on the track, one of the team members is allowed to lift it up and place it at the nearest checkpoint behind that point. The time shall still be running in the meantime.

5.   Team members are not permitted to touch either their machines or those of their opponents once the race begins (unless there is need to lift the machine as stated in fifth point). The penalty for doing so is disqualification.

6.   In the qualification round there will be maximum two team members allowed from a team in the racing arena while in the final round only one of the team member will be in the racing arena except the controller on the stand.

7.   The machines are not allowed to leave any loose parts on any part of the arena. Any machine disintegrating during the race will be disqualified.

8.   If any of the machines starts off before the flag is waved, the counter would be restarted and the machines will get a second chance. However, if any machine starts off before the waving of flag (or countdown) for a second time, it will be disqualified. No re-match will be held for the second time.

9.   Teams are not allowed to purposefully damage the machine of the opponent's team. If found doing so on track (while racing), the concerned team will be disqualified. Execution of last three rules will be subjective and relies completely on judges' discretion.


Control Rules ***

1.   Participants are required to use a remote control of frequency of band spectrum 2.4 GHz.

2.   The above rule is to ensure that there is no frequency clash during the competition and participants are not allowed to use any other remotes with frequency other than 2.4 GHz.


General Rules

1.   The teams may obtain a time slot for practice before first round of the game. The number of practice slots will be limited and the slots will be given on a first come first served basis. The teams will get to use the track only during the time of their practice slot. Any requests for using the track at any other time will not be entertained.

2.   Any team that is not ready at the time specified will be eliminated from the competition automatically.

3.   The teams must adhere to the spirit of healthy competition. The teams must not damage the opponent's machine in any way. Judges reserve the right to disqualify any team indulged in misbehaviour.

4.   The name of your machine should be prominently displayed on the machine.

5.   Judges decision shall be treated as final and binding on all.

6.   The organizers reserve the rights to change any or all of the above rules as they deem fit. Change in rules, if any will be highlighted on the website and notified to the registered participants.

Where is Ajo when you need him 

i din get u buddy..

Is it near Evarad Nagar ?

yaaa its very near to evarad nagar.. few mins walkin distance..

Ajo is RCIndia's expert on cars and racing and organisation too.All the best and may the best driver win.(Hope he is from RCIndia).

Looks good. Since you need to have the parts fabricated and adhere to certain parameters, I dont expect any hobbyists to be there. 

But a good platform for students. I will inform our local boys to join.

ohhkay thanksss..

Quote from: iamahuman on September 22, 2010, 08:36:01 AM
Ajo is RCIndia's expert on cars and racing and organisation too.All the best and may the best driver win.(Hope he is from RCIndia).

heyyy hiiii...thanks for ur reply...but only necessary ting is the engine specification..it should not exceed 4.6 cc..n the frequency criteria is 2.4 ghz..other tan tat..its all fine...

http://www.rcindia.org/rc-events/rc-car-race-competition-grand-chance-to-win-20000-inr**/msg31769/#msg31769


NOTE - Tis is to  acknowledge tat the whole event statement has been taken from the Full Throttle: Sin Street IC engine race car competition being held at IIT (MUMBAI)sp4mm3r from the 7th-9th January,2011 .

http://www.sp4mm3r.org/competitions/split_second/full_throttle/