RC Hobby vs Career

Started by Sukhpreet, February 15, 2016, 11:37:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SI74

:) perfect . You should be proud that you have a perfect partner , unlike many  :giggle: 
@ sukhpreet , hope this clip decipher your enigma  https://www.ted.com/talks/raffaello_d_andrea_meet_the_dazzling_flying_machines_of_the_future#t-670476

Sukhpreet

Already seen this....:)
And i have also seen the ones Balancing the dynamically thrown sticks :)
F-450 Quadcopter With KK 2.1.5 and FPV capability, FS-CT6B

And remember #FlyLikeAButterflyStingLikeABee

rcpilotacro

Sorry Sukpreet i saw the thread no

As a career in india, legally ? impossible
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

Sukhpreet

That means only a few people are lucky enough to get paid for what they love to do.... :banghead:
F-450 Quadcopter With KK 2.1.5 and FPV capability, FS-CT6B

And remember #FlyLikeAButterflyStingLikeABee

K K Iyer

@sukhpreet,
You should check out who sent reply number 27. You'll get a pleasant surprise!
He gets paid for doing what he loves, but in exchange, he puts his life on the line, for you and me.
BTW, that Raffaello is not an RC guy, he's a physicist!

Sukhpreet

Gusty Sir :) Thank You  for the reply sir :D
Really humbled to see your reply on my thread.........

Still can you put some light on the topic....I mean how you got into this profession :)
That may act as an important point in our lives :)
It may help us to opt this career and to  get  through this career  (:|~

And Thank You K K Iyer Sir :).... Can you share your story as well...? If Possible........

And any source to know about the ways to get into the profession which you are living (:|~

(#FlyLikeAButterflyStingLikeABee)
F-450 Quadcopter With KK 2.1.5 and FPV capability, FS-CT6B

And remember #FlyLikeAButterflyStingLikeABee

bhanuflying

Started with building a Electric powered Balsa model,became mad in to this,even my professional course helped me out in some extent to proceed with things,ending up making a ambitious project ( At that period of time with little support) to finish my engineering which lead me to pursue higher studies on the same lines.Now some where in this small world developing flight control systems!

I am happy now and I am working on what I like most but still in different perspective.People are trying hard to make this big.And I feel this topic interesting read.


Thank you



bhanu praveen

Sukhpreet

Wow Great story Sir. :)
What type of higher studies you went for :)
F-450 Quadcopter With KK 2.1.5 and FPV capability, FS-CT6B

And remember #FlyLikeAButterflyStingLikeABee

bhanuflying

Did my Masters in Flight Controls ,from Czech Technical University,Prague. :)

bhanu praveen

sharlock

I will put it this way.. you create what you want.. if you have to think logically for each n every thing then the creation dose not take place.. & this is fact..  If you say hobby as a career there can be 100's & 1000's of possibilities if you can think imagine.. but you have to take the first step..  may be many different steps.. to get success..

Antriksh

To Bhanuflyig
Very interesting to see that you guys are working on flight controller.
BTW which controller is it.
We used APM and now using pixhawk for mapping.
I would like to give it a try.
Maybe you can develop some FC to meet our requirements.

bhanuflying

@ Antriksh

I can't really give you much details about our Fc at this point of time, soon we will be testing. Still in R&D phase,I will update once we are done with our testing.Please send me a email to I can save yours and we can be in constant touch.

Thank you :)
bhanu praveen